-
How to get the current topology of Multy Plus via Web GUI?
Step 1: Access the Web GUI with a web browser. * Open a browser such as Chrome, Firefox, Safari and so on. * Type http://zyxelwifi.com, http://zyxelwifi.net or http://192.168.212.1 (default IP address) in the address bar of the browser. * In order to be able to access the Web GUI, you might have to get the correct IP…
-
How to change the channel of 2.4GHz WiFi network via Web GUI?
Step 1: Access the Web GUI with a web browser. * Open a browser such as Chrome, Firefox, Safari and so on. * Type http://zyxelwifi.com, http://zyxelwifi.net or http://192.168.212.1 (default IP address) in the address bar of the browser. * In order to be able to access the Web GUI, you might have to get the correct IP…
-
How to get the current channel of 5GHz WiFi network via Web GUI?
Step 1: Access the Web GUI with a web browser. * Open a browser such as Chrome, Firefox, Safari and so on. * Type http://zyxelwifi.com, http://zyxelwifi.net or http://192.168.212.1 (default IP address) in the address bar of the browser. * In order to be able to access the Web GUI, you might have to get the correct IP…
-
What channels are used for Admin WiFi, Employee WiFi and Visitor Network?
Multy Plus (WSQ60) chooses the best channels of 2.4G and 5G for
WiFi networks when system boots up. Therefore, Admin WiFi, Employee WiFi and
Visitor Network all use the same channel of 2.4GHz and the same channel of 5GHz.
-
Should I use the same SSID for 2.4GHz and 5GHz in Multy Plus (WSQ60)?
It is recommanded to use the same SSID for 2.4G and 5G becasue of the band steering feature. Multy Plus has to
be set up with the same SSID for 2.4GHz band and 5GHz band for guiding your
connected devices to connect to the band with the best performance. Although Multy Plus allows users to set different WiFi
SSIDs for…
-
What is bridge mode?
It is also called Access Point mode. In this mode, the Multy
Device bridges traffic between clients in the same network.
-
What is standard mode?
It's the default mode of Multy Device. In standard
mode, the Multy Device acts as router and routes traffic between a local network and another
network such as the Internet.
-
How to check the signal strength via Web GUI?
Step 1: Access the Web GUI with a web browser. * Open a browser such as Chrome, Firefox, Safari and so on. * Type http://zyxelwifi.com, http://zyxelwifi.net or http://192.168.212.1 (default IP address) in the address bar of the browser. * In order to be able to access the Web GUI, you might have to get the correct IP…
-
What to do when the throughput is not good enough between the Primary node and the extender?
When running speed test to diagnose, the result shows the throughput is not good enough between the 2 nodes, please check the signal strength either by using the Multy App or through Web GUI. The Multy App Please refer to the article How to check the signal strength via Multy app? for the method to identify whether the…
-
What to do when Multy APP shows "Unable to Activate Multy"?
When the Multy App shows Unable to
Activate Multy during installation, two options are provided for the user to continue the installation. One is Try Again and the other one is Reset Multy. Please follow the steps shown below to solve the problem. Step 1: Reactivate the Bluetooth of your mobile device and tap the "Try…
-
How to change the device name and icon via Multy App?
Step 1: Open the Multy app which is installed in your mobile device. Step 2: Tap the "Access Control" icon. Step 3: Find and tap the device name in the device list. Step 4: Tap "EDIT" icon. Step 5: Tap "Save" after changing the device name and icon. In the example, new device name is MyNB and new type icon is Laptop.
-
How to change the device name and icon via Web GUI?
Step 1: Access the Web GUI with a web browser. * Open a browser such as Chrome, Firefox, Safari and so on. * Type http://zyxelwifi.com, http://zyxelwifi.net or http://192.168.212.1 (default IP address) in the address bar of the browser. In order to be able to access the Web GUI, you might have to get the correct IP address…
-
How to change the LAN IP address of Multy Plus (WSQ60) via Web GUI?
Step 1: Access the Web GUI with a web browser. * Open a browser such as Chrome, Firefox, Safari and so on. * Type http://zyxelwifi.com, http://zyxelwifi.net or http://192.168.212.1 (default IP address) in the address bar of the browser. In order to be able to access the Web GUI, you might have to get the correct IP address…
-
The "Public WiFi Mystery Visitor" Sweepstakes
Hey forum members, WiFi is everywhere these days; you must have used public WiFi in a café, airport, or train station at least once before, right? Come share your experience about public WiFi with us and you may have a chance to win a giveaway. TO ENTER:Take a few seconds to answer the following question and you’ll get a…
-
How to change the operating mode via Multy App?
Step 1: Open the Multy app which is installed in your mobile device. Step 2: Tap the "Menu" icon. Step 3: Tap "Settings" in the menu list. Step 4: Tap to change the operating mode in "Network Mode". If Bridge Mode is selected, please make sure Multy Plus
(WSQ60) can get an IP address from a DHCP server.
-
How to change the operating mode via Web GUI?
Step 1: Access the Web GUI with a web browser. * Open a browser such as Chrome, Firefox, Safari and so on. * Type http://zyxelwifi.com, http://zyxelwifi.net or http://192.168.212.1 (default IP address) in the address bar of the browser. In order to be able to access the Web GUI, you might have to get the correct IP address…
-
How to disable WiFi via Multy App?
Step 1: Open the Multy app which is installed in your mobile device. Step 2: Tap the "WiFi Settings" icon. Step 3: Tap the edit icon. Step 4: Switch off to disable WiFi and tap
"Save". Step 5: The whole WiFi Settings will be grayed out.
-
How to disable WiFi via Web GUI?
Step 1: Access the Web GUI with a web browser. * Open a browser such as Chrome, Firefox, Safari and so on. * Type http://zyxelwifi.com, http://zyxelwifi.net or http://192.168.212.1 (default IP address) in the address bar of the browser. In order to be able to access the Web GUI, you might have to get the correct IP address…
-
How to enable/disable the daisy chain feature via Multy App?
Step 1: Open the Multy app which is installed in your mobile device. Step 2: Tap the "Menu" icon. Step 3: Tap "Settings" in the menu list. Step 4: Tap "Advanced Settings". Step 5: Switch to enable/disable the Daisy Chain feature.
-
How to enable/disable the daisy chain feature via Web GUI?
Step 1: Access the Web GUI with a web browser. * Open a browser such as Chrome, Firefox, Safari and so on. * Type http://zyxelwifi.com, http://zyxelwifi.net or http://192.168.212.1 (default IP address) in the address bar of the browser. In order to be able to access the Web GUI, you might have to get the correct IP address…
