-
[NEBULA] Defining different content filtering/bandwidth rules for users/-groups
Hi, as we are drawing a wifi-solution based on radius authentication through Azure, we are were wondering whether it is possible to define specific bandwidth and content filtering rules for the radius based users/usergroups? Is it possible to define specific rules for a given SSID in terms of bandwidth and/or content…
-
Notes Section
Hey Guys Currently I just add notes such as PPOE details for a NSG in the device description section. But a dedicated notes box would be really useful.
-
L2TP/iPsec Windows
Hey guys I don't have any issues setting up in Nebula or getting the clients connected. But once connected it all goes wrong, on every machine I have had to add a route add command so the machines can see the remote network such as below... route add 192.168.1.0 mask 255.255.255.0 172.16.0.0 I have added batch files in…
-
VPN client for NSG100?
Hi I get "Download VPN client" on the page where I set up Remote access via IPSec client, I click on it I get to a page where I can download software, but when I select NSG100 I can not find VPN client. Can I use VPN client on NSG100? Sincerely Olav
-
Aps randomly lose connection or restart every few hours
Hello, Our APs seem to randomy disconnect or restart every few hours, in the event log it says that the Netconf connection is disconnected. They always go offline for like 2-4 minutes and afterwards everything's okay again. I checked the connections and the LAN is stable and doesn't have any kind of connection issue. I…
-
No internet (for a while) when switching to other AP
WiFi internet works great, if you don't move through the building. When moving around, and getting connected to another AP (all NAP203, over a NSG200 gateway), the internet is gone for a few minutes. What can this be? The WiFi stays connected, but it says No Internet. Reconneting won't help, only waiting.
-
Creation and assignment of VLANs
Hi all, I was trying to configure VLANs on Nebula CC but can't get it to work, what am I missing? I need to set 3 VLANs for 3 different SSIDs. SSID1 should be on VLAN1, SSID2 should be on VLAN2 and SSID3 should be on VLAN3 but able to access all VLANs. I also need to configure the switch so that ports 1-8 are on VLAN1,...…
-
Hi, I am completely a novice and want help to set up access point NWA1123-AC Pro
I have registered on NCC and the dash board says that nothing is connected.I downloaded the Nebula App on my mobile and have registered the access point Dashboard screen below: The management light on the actual access point is flashing green and orange.I have connected the access pointg to the network by cable. How do i…
-
Building mesh with Keenetic Giga
Hi. I have Keenetic Giga III as my main router which is connected to the ISP. I want to extend WiFi coverage with NWA1123-ACv2 which is connected to the Giga III with a wire and PoE injector. AFAIK this can easily be done with another Keenetic OS based…
-
access/adjust the ssid schedules through the iOS app
Add a function to access/adjust the ssid schedules through the iOS app which will be more convenient.
-
SSID Schedules disappearing days
When I adjust a schedule for an SSID, if I make the SSID unavailable for one of the days (by sliding the two endpoints to the same time) then after I save the changes the whole day disappears from the schedule and I am unable to access that day anymore. How do I get my days back? How do I avoid this problem?
-
DDNS name in Virtual Server Public IP
Would it possible to be able to enter a DDNS name into the public IP field in the Virtual Server section? I have clients who would like the firewall to be able to control who can access their SFTP. Thanks, Joe
-
Dashboard time range
I would find it very useful to be able to see a wider time range for the Sitewide Dashboard. 24 hours is helpful but a 7 day and 30 day snapshot would be much more informative.
-
Help with poor performance on NSG100/500Mb cable broadband
Hi I have an NSG100 protecting my local network and this is connected to a Virgin Media Business cable router (500Mb service). The Virgin router is in modem only mode as i have static IP addresses. The NSG has a single static IP address on WAN2 (connected via RJ45) and this should be connected at 1Gb. The internal network…
-
[NEBULA] Difference between the NSG series and the new USG FLEX series?
What will be the main differences between NSG --> USG FLEX gateways.
-
NAT Loopback with a dynamic WAN IP
I found that NAT loopback is turned on automatically when in the virtual server settings you type in the static IP of the WAN instead of "any". Most of my sites don't have static WANs & use DDNS. How can I use NAT loopback these networks?
-
Oid snmp values for nsg gateways and more
Where can I find oid values for nsg series gateways Nwa1123 aps, gs1920 switches. Are values consistent across devices?
-
remote access vpn to other site to site
our client has 5 locations which are connected by Nebula site to site vpn.
one site has a remote access vpn connection.
Can it be done so that other offices can also be accessed via that remote access vpn connection
-
NWA-1123
This device will only connect at 100 mbps. The ethernet indicator color is amber. When I attached another NWA-1123 using the same cable it connects at 1,000 mbps. I attempted factory resetting. Nothing I do makes a difference. How do I correct this?
-
1Gbit (AV + IDP) throughput, when?
When can we expect to see a Nebula Security Gateway for true gigabit WAN. None of the existing ones are relevant to today's internet via fiber connections. The NSG device series have way to low (AV + IDP) throughput which is really strange as both USG Flex 500 and ZyWall ATP 500 have almost twice as high (AV + IDP)…
