-
NAS326 poweroff from command line, remote machine
Hi, Zyxel NAS326 updated to latest firmware. Is there a way to switch it off from a remote machine in the same LAN via SSH? This command shows the output of uname -a from a remote machine sshpass -p '123' ssh admin@192.168.68.120 "uname -a" But it seems sudo is not available and the only way to switch it off is…
-
NAS326 CPU fully loaded with io
Hi all, again, I got this annoying problem, that the CPU of my NAS326 is at 100% load. At the moment I even can't access the web interface. And certainly I can't access my data via smb. When connecting with Putty (ssh) and running top, I can see it's not the old problem with python, but the CPU is loaded with io. Mem:…
-
write-protected volume?
Hello! I have a NAS 326 with two HDDs. The first is full, the second is empty. When I try to copy from the first to the second, I get an error message that the second HDD is write-protected. If I first copy the file from the first HDD to the PC and then from there to the second HDD, the copy is done without any problems.…
-
NAS540 - Can't reach the webGUI after firmware update attempt.
Hi there dear community members. We have a NAS540 in our office which we don't use. A couple days ago I decided to give it a shot and found that it was still working. It was running with 5.11 firmware. I thought it would be good if I update it to the latest.. It couldn't find the latest firmware by itself and I wasn't able…
-
NSA325 RAID1 lost
Hello everyone, I lost my RAID1 on 2 HDD, 4Tb. Both HDD are 4Tb, WD. I've got red indicator on 2nd (right side) few times, and only one on 1st (left side) during data coping. About one week ago I switched off NAS and start inspection of each HDD by Victoria program. I connected 2nd faulty and found a lot of BadSectors on…
-
Sync stops suddenly - DropBox Zyxel NAS542
Hey, I've got a Zyxel NAS542, and I want to transfer all NAS data to a DropBox account. I'm able to set up the DropBoxClient app in the NAS, and the synchronization kicks off well (I monitor it using PuTTY with the command tail -f PATH/.dropbox.log file). But, out of the blue, sync stops randomly and I see this message on…
-
NAS542 - Teardown video/instructions?
Does anyone have instruction (or video) of how to open NAS542 entirely? (Didn't find anything on Youtube or via Google search… 😐️) I just realized how much dust it has collected inside the chassis and thought that a proper cleaning might keep the temp down a bit at least…
-
NSA325 Share permissions
I have a strange problem accessing user created shares on my old NSA325 ( I know it is no longer supported but it was doing the job). From Windows 11 (and Wind 10) I can not access any user created shares on the device, I can access the built-in shares, music, video, etc. If I try to map a network drive it fails with the…
-
NSA325-v2 becomes unresponsive after a while
I have a NSA325-v2 which I'm in general happy with. But recently I have noticed that after a while (like a week or so, haven't measured), I can't access it neither via web UI (I get "connection refused" error message), nor via SMB (tried both on macOS and Windows), nor can I access videos and photos on NAS via my TV. This…
-
it's about entware instalation on nas540
Hi there Who can tell me step by step about this ? for example ,What's te meanin of 'make it executable'? etc etec Introduction The described procedure is known to work on the Zyxel NAS540 and NAS542 running firmware 5.21 Installing Entware Update your firmware It is necessary to update firmware to V5.21(BHAG.6)C0 or…
-
EMailConfiguration
Hi, i have a new NAS326 (Firmware-Version:V5.21(AAZF.1)) and i want to configure the NAS to send EMails. I filled each field with the needed information ... also the SMTP-server with the correct credentials. But the result of the test email is always: error. Only "error", no more details. The email account is working (i…
-
NSA-220 Plus
Hallo. I have a question. i have a NSA-220 Plus with a gigabit ethernet. my home router has gigabit. And my macbook with a ac wifi card is connected with the router with nearly a gigabit. but my transfer speeds are 5 MB/s my ethernet cable is half a meter, and is not cat6 but cat 5e. Is this the problem? #NAS_Oct_2018
-
NAS540 email settings log report
Dear community, after a factory reset of the NAS540 i can't install anymore the email log file report. The firmware version is V5.21(AATB.12) I am using smtp authentification on pop3.vodafonemail.de. Every time i enter the data i click on "After applying settings, Send a test email" i receive an error message "Send test…
-
Nas 542 Raid 0
Why can't I create a raid with 2 18Tb disks? Both are recognized as 16.37 TB, but I can't get any further. Maybe someone can answer me in German.
-
NAS540 RAID5 Volume Down
Hello everybody, hoping somebody can help me with an issue that I recently had on my NAS540. The NAS540 has four identical 8tb drives installed under RAID5. I updated it to the most recent firmware about 3 weeks ago. Last week I was backing up the NAS540 to another NAS and after it was about 95% done copying the NAS540…
-
Unable to delete some files
In a Nas 326 I have a folder with some files that I cannot delete in any way. They are files created years ago by a now defunct PC and every time I try to delete them the message "requires authorization from [nas name]/admin" appears. I try both from Windows and from the file browser inside the NAS, but I can't delete…
-
NAS325v2 CUPS server next to oryginal firmware
Hello, I use an old NSA325v2 and it meet everything I need except CUPS Server. I tried to install cups and hplip from Entware-ng repository (plug in from Mijzelf) but I cannot obtain web interface and configure my server. hp-setup give error "warning: python-dbus not installed. error: Unable to locate models.dat file HP…
-
NAS326 - Updated firmware, Now just hangs on login...
Upgraded firmware, Now just hangs on Login screen…. I have rebooted the NAS twice, and it did not help….What next? This is just unusable as is. I spent an entire day trying to get this to work correctly…. I'm not happy…
-
How can I reset the TLS/SSL connection to http instead of https (NSA310)
Since I forced the HTTPs connection on my NSA310, I can't access the nas via his ip address and the web browser no longer. I also haven't downloaded the system default CA file before so I could install it into my browser. How can I still login to the nas to manage the device? Can this problem be solved without having to…
-
NSA320S SMB upgrade
Hi, I tried to install the MetaRepository in order to have Entware-ng smbd. First I placed the web_prefix file with http://zyxel.diskstation.eu/Users/Mijzelf/zypkg-repo/ and http://metarepository.tk/Users/Mijzelf/zypkg-repo/ in /Admin/zy-pkgs share. But neither seems to work. The packages list is empty. What do I do wrong?