-
NSA310 - volume missing for unknown reason
Hi, I've had NSA310 for a few years now and had no problems with it whatsoever. Suddenly a few days ago the HDD became unrecognizable by the NAS (HDD led is not lit). Everything was fine the night before but the next morning it just vanished. The HDD itself is OK and I can access everything on it under Linux and Windows…
-
NSA325 SSH password
Hi folks, forgive if this question has been answered, but I cannot find a relevant post. NSA325: The SSH/MYPHP password is reset at each reboot? It didn't used to. I have to reset to default using reset button on rear (one beep) and then change Root/Admin password back in PHPadmin. Any ideas please?
-
NAS326 write speed reduced
NAS326 write speed reduced lately. Both from FTP and internal donload client. Read speed is still good though. Firmware V5.21(AAZF.9)C0, hard drive is fine...
-
NAS540 Undelete files
Is there a way to recover deleted files? My family photos are deleted by some software and I need to recover them.
-
NAS542 - Replacing all disks
I recently bought a slightly used NAS542 with 4 x 1TB disks in RAID5. (currently ~85% full, latest FW installed) I'm planning to replace all 4 disks with 4 x 3TB disks but I'm a bit unsure how this is done smartest way without losing data. Just pull one disk at time, replace, add to raid-set and wait a day until resynced…
-
Help for a newbie to NAS'
I purchased a Zyxel NAS326 but not sure where to begin. I have questions that are not really addressed in the manual. I hope I can ask them here. 1. I have only USB external drives that I was hoping to be able to access as a media center. Do I have to purchase an internal drive for the NAS to work? 2. If I purchase an…
-
Backup/Connect Zyxel NAS326 to Strato HiDrive
Hello @All, has anyone already gained experience with a connection to "Strato HiDrive"? I would like to backup / copy my NAS-data to HiDrive at regularly scheduled times. When I try to create an RSYNC job (which would be my personal favorite for the connection / backup), I can only use the "Admin" user (which is preset in…
-
Media server Twonky blocking file sharing
Recently I bought a new smart tv so I turned the Twonky media server on Zyxel 325 to play movies directly from LG TV. Everything works fine until I want to access the windows network drives containing the movie files when windows shows the server is not accessible anymore and of course neither mapped network drives. There…
-
Re: NAS326 After Plex Installed: Needs to add Local Movies\Music\Photos
-
Re: NAS326 After Plex Installed: Needs to add Local Movies\Music\Photos
-
Can I get data from RAID1 with Windows PC?
My ZYXEL NAS326 died. It does not show up with the NAS Starter Utility and I cannot communicate with it. Both of my Segate 4TB hard drives, however, are still good. I can connect them to a SATA drive reader and see all of the data, but the data is split among 2 drives. Is it possible to recover RAID 1 data with a Windows…
-
nsa320 problem with utility
own nsa320 and i have a problem connecting with the utility. I insert the disk, connect the NAS cable to the PC, turn on the NAS. in windows 10 in zyxel utility i can't see server. I tried it even without disk, hard reset, another PC, firewall disabled in PC. did anyone know about it?
-
NAS 326 as a standard usb drive
Hi, can I use my NAS326 as a standard 2 bay usb drive plugged into a windows PC ? Regards Mick
-
NSA310S Log massage "built-in-service/info/Userlogout FTP"?
Hi GuysSorry for my bad English. :) I have the entry in my NSA310S protocol: built-in-service / info / Userlogout FTP What exactly does this entry mean? When a user dials in via FTP, the entry is built-in-service / info / User "name" ("ip") login FTP successorUser "name" logout FTP but what does the entry Userlogout FTP…
-
NSA325: Internal volume degraded - repair not available/reachable (RAID1)
Dears, I have a NSA325v2, configured in RAID1. Lately, volume status has become "degraded". The storage/volume management page takes a very long time lo load (dozens of minutes). Even after I reach the page, it stays in "Please wait" (for hours...). I cannot even try to repair or resynch the RAID. See below. Can you please…
-
How do I recover a volume after repair process silently failed?
My NAS540 started beeping two weeks ago. The volume was degraded as drive 2 failed. Following the web-interface instructions, I replaced it and initiated repair. A day later, I tried to login to the web interface and it just hung forever. A few posts said the repair may take a while, so I just waited... ...for five days.…
-
Do I need to pay for Twonky Media Server
I have a home setup which uses a NAS326 with the supplied Twonky Media server on it to allow me to to play the music stored on the NAS throughout my house and I have been paying a minimal amount to Twonky for this facility. As I am only using my NAS for this facility do I need to pay Twonky? or am I wasting my money? My…
-
Midnight Commander on Nas520
I`ve made a Factory reset on my Nas520 and installed the newest V5.21(AASZ.5)C0 firmware. Now I try to reinstall Midnight Commander from Meta Repository from http://zyxel.diskstation.eu/Users/Mijzelf/zypkg-repo. But MC don`t appear in the App Center anymore. In the past I`ve already used MC on my Nas from the…
-
Bug - NAS540 / NAS542 Port Trunking - Transferrate status wrong
If the ZyXEL NAS540 is connected via Port Trunking, the actual transfer rate is counted twice in the Status Center. In the example, a transfer is running from a QNAP NAS that is also connected via port trunking. There you can see that the current transfer rate is about 65 to 70MB/s. In the ZyXEL NAS, the double value…
-
NAS 326 volume con cartelle separate
Salve, nel vecchio nas 325v2 il volume creava una condivisione di sistema che racchiudeva tutte le condivisione create dall'utente in modo da poter montare una sola condivisione su windows e poter spostare i file senza grosse difficoltà, adesso sul nas 326 tale condivisione non viene creata dal nas e il pc vede ogni…
