-
Twonky NAS326 Uable to beam to Smart TV
I have a VIZIO 60 inch TV with Chromecast built-in on my network and I am able to cast to it. I have setup Twonky and tried to send slideshow photo to it and it said "Device can not play this content" Is it because there is no app for Twonky on the TV? Or something else? Emerald Dragon
-
NAS326: Site NOT SECURED
How do I fixed Site Not Secured when I log in through the web?
-
NAS326: Unable to find any UPnP supported routers
When I go into my NAS326 control panel under UPnP Port Mapping It said "Unable to find any UPnP supported routers". But when I check my router, UPnP is turn on. Not sure what else to do. BTW, I have Google Wifi Router.
-
Keep original creation date
I just bought a new NAS542 and files that are copied into it get their creation date changed to current time. I need to keep the original creation date, is it possible? Thank you.
-
Cannot access some shares in Windows Explorer
I have created on my NAS325 v2 three shares (S1, S2, S3), to be used by three users (U1, U2, U3). I don't remember what exactly I did when I created S1 and S2 some time ago, but when I look into the settings, it seems to be the same for all: The owner of all is "admin"; admin and U1 have full access to S1, admin and S2…
-
NAS 326 Read-Only File System
Hi everyone, i've updated the Nas326 to the latest FW available, the V5.21(AAZF.8), later i tried to remove some files from the admin directory using the FileManager built-in application but it seemed that nothing happens, infact the file was not removed. I searched on this this forum and a possible solution i found was…
-
NSA325_v2 visible on wifi network home
Good morning I own an NSA325_v2 and a Sony smart TV I would like to know how to see my nas in my network. What settings should I do?Do I have to open any doors?Thanks
-
NAS542 get system logs
Hi, I have a problem connected with copying files to NAS via SMB,but the problem isn't permanent.How can I get NAS system logs to know more about the trouble? #NAS_Mar_2020
-
NSA310 network problem
Hello,I have a NSA310 and a strange problem. It is not visible on the network, I have configured a static IP for that, it is not visible in the router also. But sometimes I can browse it from my smartTV and answers on ping command. Sys led is blinking green, only the yellow LED is blinking on the Ethernet port.I have also…
-
DESFRAGMENTAR DISCO NAS
Hola recientemente compré e instalé un NAS326 y me surgió la duda de cómo se puede desfragmentar los discos duros del NAS. muchas gracias
-
If nas326 finds upnp router, but specifies address as 0.0.0.0, is problem with the nas or router?
Am not able to access nas326 over wan. nas works over lan but not with zyxel.me. I think the nas should identify the upnp router with the given static address. Is this the nas or the router which is the broken link? (nas326 | control panel | network | upnp port mapping | status address.)
-
NAS326: Setting up RAID from Basic drive setup
OK Originally I setup my 1TB SATA as Basic drive and starts using it the other day (with data already on it), but I want to starts setting up RAID on my NAS326. My problem is I have a smaller SATA drive 600GB not a 1TB equivalent to the primary drive to match. 1st. Will that works for RAID setup? 2nd. Can I setup RAID with…
-
Access Denied for DLNA (Twonky) Media Server in Windows and Android and BubbleUPNP
Hello, I have recently configured Twonky Media Server on Zyxel NAS326 V5.21(AAZF.7). Simply in Settings >> Media Server >> Enable Twonky Media Server. I also successfully configured several folders in Share Publish and made sure that these folders are actually published in each folder settings. Overall config looks like in…
-
WDS server in zyxel nas 326
Is it possible to configure a wds server in a zyxel nas 326?I want to install windows on pc's from nas' folders.thanks in advance
-
NSA 325 keeps rebooting
Hi,I have a NSA 325 and it tries to reboot all the time. I had it shut down for a few weeks but now I cannot get it up again. If I plug it in just the powerbutton lights up a few minutes long the nas tries to do something, then the powerbutton light goes out but just for miliseconds and comes back on. If I disconnect the…
-
iSCSI LUN
I am trying to setup iSCSI LUN for my NAS326 and I am a newbie on this subject. Currently I have 2 different size internal SATA hard drives. So, I can have redundancy backup for my files and pictures. In the past, I have lost way too many family pictures with the way I kept my files. I am (as I am typing) trying to recover…
-
How to install Tweaks / Metarepository
Hi, Iam using a NSA310 with fw V4.70(AFK.3). I wanted to install the Tweaks in order to shutdown the nas remotly from my openhab. Changed the wb_prefix file to "http://downloads.zyxel.nas-central.org/Users/Mijzelf/zypkg-repo/" Than updated the package list from the Internet on the web interface. Nothingh happened. I still…
-
Twonky Mediaserver shows "stereo" as file names
Hi, Twonky Media server shows "stereo" as filenames for newly converted m4v files. I restarted (rebuilt) the media database but I got the same result. It is a Zyxel NAS 542 with firmware V5.21(ABAG.5). It is the DLNA view: It is the /i-data/.media/twonkymedia/db/11.tms.dat file: I think Twonky is using the audio channel…
-
NAS326 Replace one hard disk
I don't know if this is possible but my internal disks are full and I want to replace the 2nd bay one with a new 8TB. However I have some data in it already and it is already formatted as ext4. Is it possible to make the NAS recognize/mount it as internal Volume 2 without having to go through the process of having to…
-
NAS326: Removing multiple partitions from an old hard drive
I have a SATA hard drive that I want to use for my 2nd internal NAS that I kept for spare that was previously used with MAC partitions on it. How can I gets my NAS to format my hard drive correctly and get a full capacity instead of portion (10%) or what ever it think it has. Any helps would be greatly appreciated. Thanks.…