-
Zyxel PLA5456 is not functional
Good afternoon, I have the following problem . I have a Powerline Adapter from zyxel the PLA5456. Also from November a router from zyxel. But currently I still use a Fritz Box Router from AVM. Yesterday evening I set it up and the Zyxel Powerline Adapter was displayed in the Fritz Box, then I plugged in the second adapter…
-
4g dongle with zyxel 1312 router
what 4g dongle do you recomend with zyxel 1310 router
-
Firmware version
How to find firmware version of modem
-
Zyxel T50 modem power light is always red.
Hi, Can anyone help me with the issue with my modem. After connecting it to power supply power button always remains red and it does not detect any internet signal. Also, I tried factory reset by pressing reset button for 5 minute but that did not help either. Thanks in advance, -Honey
-
VMG8924-B10A VoIP menus removed by ISP
Hi All, Just opening up a new thread on the missing VoIP tab in a VMG8924-B10A. I recently moved to John Lewis broadband and although they now only provide a VMG3925 router for new customers, I wanted to use VoIP so got hold of an 8924 only to find the VoIP stuff missing. I did try downloading and flashing with the latest…
-
Are you looking for the best vpn black friday deals in 2020?
-
OpenVPN
Does WMG4825-B10A provided by provider support OpenVPN for my NordVPN account or will I have to use my own Asus device?
-
WAH7601 requires reboot daily
I bought two of those LTE routers to provide internet access to house alarms and cameras. Problem is that they stop forwarding packets to/from the WAN interface. The WLAN part and usb tethering works in the sense that I can connect to the routers website. Status there shows everything OK. WAN interface has status UP. There…
-
C3000Z patch for "partial authentication bypass vulnerability"?
https://www.techradar.com/news/your-wireless-router-could-be-hacked-if-you-have-this-vulnerability reports the vulnerability below. Is the C3000Z vulnerable, and if so, where do I find the patch? "A team of researchers from Synopsys' Cybersecurity Research Center (CyRC) in Oulu, Finland have discovered a partial…
-
zyxel_support_send.zip
Hallo, wer hat noch die zyxel_support_send.zip und kann sie zur verfügung stellen?? Gruß Mike
-
How do I know my extender is working?
I bought and set up WRE2206, but there's no other light besides the blue power light. My router has WPS button so I think the set up went fine. Do I need to do anything after the light stops blinking? Should the whote lights be on?
-
VMG1312-B10D Remote management
Hi I have Zyxel router VMG1312-B10D firmware V5.13(AAXA.7)C0 . I can't manage it remotely I of course enable the remote management, I tried Http, Https tried to change the port - nothing ! Very frustrating Please help Regards david #CPE_Mar_2019
-
VMG1312-B10D web interface not accessible
I accidentally connected it to another router with same ip (192.168.1.1) and since then it is impossible to access web interface. ssh port is closed, so i can't access it via putty as well. Tried resetting it a few times but nothing helped.
-
Connexion internet
Hi, my connexion wifi is ok, but I have no internet access on lte3301-m209 : is it necessary to set DNS adress or not?Thank you for your answer
-
Red light
My second node is disconected and ligts red. I tryed diffrent locations close to primary node. 5-7 m distance. Same result. Deleted the node and added it again. Still red. What is wrong
-
XMG3927-B50A bridge mode
hello together i am new here and i am trying to set my XMG3927-B50A router to bridge mode. I live in Switzerland and my ISP is Sunrise. Sunrise has an OEM modem which I replace with Zyxel. It works wonderfully. However I have built a Google nest Wifi router mesh network and now I have the double NAT problem. My ISP of…
-
slow connection with usb port in P-660RU-t1 v3s
Hello today i bought a P-660RU-t1 v3s modem. this model has two port: one LAN and one USB. when i use LAN everything is OK and i have maximum speed(16 mb/s) but when i use usb port my speed become about 8mb/s. i dont know why. i installed usb driver for windows 7 (last version in CD) but my windows is 10. can anyone help?
-
is there a compability matrice available if I want to add a third device to PLA5456 pair?
is there a compability matrice available if I want to add a third device to PLA5456 pair? where can I purchase on device and not a pair?
-
zyxel SBG3300 VPN IPsec/L2TP
Hi, I have configured VPNs on a Zyxel SBG3300. When I connect remotely with a Windows or a MAC, I have access to network resources, but I'm unable to connect to the router console with its internal IP address. Another point: I realize that I access for example the console of my NAS, but the ping does not respond. Do you…
-
New C3000Z Modem "Ethernet" doesn't have a valid IP configuration
Got error message one day after installing new C3000Z modem received with upgraded CenturyLink DSL service 60Mbps. Did not get error messages with previous C1100Z modem on 25Mbps service. Ran Windows 10 network troubleshooter and it 'reset' the ethernet adapter to clear the error. After receiving error again a couple of…
