-
PLA-5456 and 2nd Wireless Router
My apology as I’m sure this question has been answered before but I can’t find it. I have a PLA-5456 set, and in the secondary room where I’m receiving the signal I actually need to connect to a wireless device (a security camera). To do this do I just need to plug in a secondary wireless router into the Ethernet port? I…
-
Zyxel t50 and Express VPN ?
Hi, Ive just received a new Zyxel T50 router from my internet provider, T-Mobile. Unfortunately I have no clue how to configure it to use my expressvpn account.. The support at ExpressVPN had no clue either as there is very little documentation about it. Any help please ? #SP_Jan_2020
-
Enabling AirPrint and Apple Remote on ZyXEL AMG1302-T11C
I had issues with * Apple AirPrint on my Canon TS8051 Printer * Using the Apple Remote App to control my AppleTV over wireless connection via my ZyXEL AMG1302-T11C router. I could not find much help via Google. After changing multicast settings on the router AirPrint and Remote now work correctly Change 1 - Network…
-
Zyxel 3301 Plus - UI freezes quite often -
Hi, I have a new Zyxel LTE 3301 plus - Firmware is the latest. The access to the webpage freezes regularly. Any ideas? Thx Charly #SP_May_2020
-
VMG8825-B50B SERVER PRINTER DOESN'T WORK
I can't print on my epson al-m1400 printer when usb-connected to my router. Is it impossible or there is a way to?
-
Concurrent WAN on XMG3927-B50A?
On my old router (VMG8924) there were settings to enable con-current wan along with port selection, but I can't find any similar settings on my new XMG3927-B50A. I need this enabled on port 1 to view BTTV streaming services here in the UK, anyone know what needs to be done?
-
Zyxel VMG3925-B10B Setup for Sky Fibre
Hi everyone, would really appreciate some help in setting up my newly acquired modem please. I have Sky Fibre broadband (up to 24MB) and i'm trying to completely do away with the Sky Q router, as it's rubbish. I have purchased a Zyxel VMG3925-B10B after reading some rave reviews and my intent is to use it in Bridge mode…
-
[VMG8825-B50B] USB port runs slow on file transfer
Hi all, I have just installed the VMG8825-B50B and works well except for the Hard disk connected to the USB 3.0. when i transfer every type of file it reaches peaks of 3MBps and then slow down to an average of 300kBps. tried to trasfer from different laptops and tried to connect different hard disks, same story.…
-
Zyxtel vmg8828-B50B
Hello, I have the modem in question and I connected a hard disk to the USB port. I can reach the Hard Disk from any device, but not from those with WINDOWS10. Can you help me? Thank you. Valerio.
-
Under PPPoE you cannot add a service name? Why?
Under PPPoE settings you cannot add a service name? Why? This is imperative within Asian countries to strengthen the signal. Also why can’t I edit the PPPoE settings once I have my network setup? Again this is restrictive. Finally the cloud servers are SO SLOW. Why can’t you make this app native!! For the settings at least!
-
PLA5212
Hello all, I am using PLA5212 some years without problem. Now very frequent outages and I must restart device (unplug/plug). Regarding my electricity topology I did not make a change in my house. where there may be a problem? I am on end of life of device? Thank you Martin #PLA_February
-
Zyxel PLA5456 stop working
My Zyxel PLA5456 stop working and LED’s won’t turn on, so it’s not getting internet connection. The pass-through power outlet does work. Has anybody face this issue before? #PLA_Apr_2020
-
PLEX
Install PLEX server on 326. I have seen instructions but I am not getting it I guess any video or stem by step?
-
Ethernet speed PLA4201
I have 2X PLA4201 500mpbs mini Ethernet Adapters in my house. No matter how I try to wire in my router only recognizes the speed at 100mbps. I have checked all cables and can get 1000mbps when using with my pc. The devices are plugged in next to each other 10 ft from the router
-
VMG4825 and 4927 MIB/OID
Is there anyway I can get a list of MIB/OIDs for these two models? I did not find anything to download on the website, and I did not find anything in the knowledgebase.
-
Zyxel VMG3925-B10B Setup for Sky Fibre
Hi everyone, would really appreciate some help in setting up my newly acquired modem please. I have Sky Fibre broadband (up to 24MB) and i'm trying to completely do away with the Sky Q router, as it's rubbish. I have purchased a Zyxel VMG3925-B10B after reading some rave reviews and my intent is to use it in Bridge mode…
-
Router to mesh compatibility
Hi I have a xmg3927-b50a provided by my isp and Wi-Fi doesn't cover all the house. Have seen in the settings that it's mesh enabled but don't know with what devices it works with.
-
Zyxel modem or box wps settings ,??
Hello! Please Update always the wps settings Zyxel modem or Box,??
-
How do I port forward a Rust Dedicated server?
So I switched to the C3000Z modem for CenturyLink and setup the internet so everything worked. I started port forwarding by setting the static IP for the device and did that correctly. So then I went to the Port Forwarding tab, selected the device by its name and the IP shown, typed in the starting and ending port, set the…
-
Slow speed on Ubuntu, ZyXEL AC600 (NWD 6505)
I use Ubuntu 20.04 LTS, Dual-Band Wireless AC 600 USB adapter (model name: NWD 6505), the router works at a frequency of 2.4 GHz. Under Windows, the download speed is about 20 Mbps, and under ubuntu, about 3 Mbps. Of course, on Windows I installed drivers from the official site. But I do not know how to do this on ubuntu.…
