-
zyxel router emg2881 - t20A > Laptop Asus > Windows 8
HI all, my laptop only has wifi : When connecting to Modem wifi it only has limited connt. Looks like modem does not assign ip adress but Modem does see the device and mac details on modem home screen. I tried Static ip config with modem(not working still) and tried manual static ip setup in windows ( still not working) in…
-
collegamento usb
buonasera, ho provato a collegare una pendrive al mio 8825 wind, ma al momento di provare a trovarla in rete mi dice che non supporta smb1. ho anche abilitato il servizio in Windows. cosa puo essere? #SP_May_2020
-
Intermittent reception
For a week my connection has been intermittent, breaking off for a few minutes or hours, then coming on again. this has happened in the past but never so often. Your help line is useless, since it always has an "unusually" high number of calls.
-
WLAN Router
Is the VMG1212-B30B still an aktuell model???
-
New Zyxel Modem Slower Than Old Zyxel Modem
So i decided to change my old P-660-TWx modem because i needed to reset my modem 5 times a day and the process took 5-6 minutes everytime. So i bought a VMG3625-T20A. It is stable and all but can't connect to it upstairs but thats ok too. I can buy a router for that. But why did i lost speed? How can my 10+ year old modem…
-
VMG4005-B50B - CenturyLink
I have CenturyLink VDSL2 bonded service in USA. They provided an ACTIONTEC C1900A device. The GUI of this device gives the following details:Broadband Mode Setting: Auto SelectBroadband Mode Detected: VDSL2 Bonding - 8ATransport Mode: PTMService Type: PTM-TaggedThe GUI lists "DSL1 Status" and "DSL2 Status" - each link…
-
PLA Configuration Utility PLA5405 v2_V7.0.6.17.0926(Windows) - Windows 10 Professional 64bit
I have separately installed both Windows 32 and 64 bit versions of the utility but neither will start in full screen and can't be maximised. Running in compatibility mode is similarly unsuccessful and the utility can't be used. Does anyone have any suggestions? #PLA_Apr_2020
-
Powerline compatibiliuty
I have bought 2 PLA 5405v2 to extend an existing PLA 5206 network but the new devices dont seem to be able to connect. Can anyone tell me why not? #PLA_Apr_2020
-
the PLA6456 system
Does the PLA6456 G.hn 2400 Mbps wave 2 power line system allow for more adapters to extend the internet over power lines or is it just one location after the first adapter is plugged into the router? #PLA_Apr_2020
-
Continuous arp requests to a specific address
Hi everyone, I own this: Zyxel model no.: VMG8924-B10D, with FW: V5.13(ABLH.0)b6 DHCP configuration ON, no switch, cable directly connected to the router, wireshark tells me that there are continuous arp requests to an IP, I tried to turn the router off and on again but the requests continue, I tried to set a static dhcp…
-
VMG8825-B50B & Multy
Hi, I have a VMG8825-B50B provided by my ISP. I'd like to extend the wifi range and was looking in the Multy line. As far as I understand the VMG8825 supports Multy Pro (I have succesfully connected to it via the Multy Pro IOS app), with that technology the closest device to my needs would be the WAP6804, but I cannot find…
-
PLA5456 both ports connected causes loop?
I just purchased a PLA5456 set and I'm having some issues with setup. I'm attempting to connect two devices in the remote room to the local adapter. I'm operating under the assumption that I need both ports on the local adapter connected to my router to transmit to the two ports on the remote adapter but every time I plug…
-
How to block HTTPS URLs for one device (MAC address)?
I have a VMG3925-B10B home router. I am trying to block youtube for one device only. When setting up the parental control rule, it says that HTTPS URLs cannot be blocked. What can I do to disable/block access to an HTTPS URL for one device (one MAC address) only?
-
PLA6456 power saving suggestion. . .
The PLA6456 currently has two power-saving methods. The PLA6456 will go into standby mode when - 1.) No ethernet link is detected. For example, if the attached device is powered down, and the link light is off. 2.) The device doesn't detect any network activity for "X" amount of seconds. These options work reliably for the…
-
AMG1302-T10C Admin 192.168.1.1
What is the admin password and user?
-
VMG 1312-B10E
cómo configurar el router como puente para aumentar la señal en otro sector de la casa?
-
VMG1312-B10A - Games - Multiplayer - Opening ports
Games Eagle Dynamics DCS World Open Beta and Condor2 How do I set up my router if I want to host in multiplayer? How do I set up my router to get the ports opened? Sometimes it works for DCS, but it is not working for Condor2 I need help. It's been a long time now. I have tried everything possible to solve the problem. I…
-
Can't see drive letters in directory w/o running NSU first
Is it possible to just fire up the computer and have the drive letters visible in Windows Explorer without running the NSU first?
-
VMG8825-T50K 'phantom' guest wifi network
Hello, my Zyxel modem is supplied by the Italian operator Tiscali. Almost everything is OK (apart from a USB sharing problem bound to be fixed with the next FW update). One puzzling thing is the presence on the available network of 5 guest networks in addition to the main one. The mistery is that in the settings I have…
-
Zyxel P-870HN-53b forgot admin password
Hi, I have problem with Zyxel P-870HN-53b, whtch I have set a port forwarding QoS etc. Previous network administrator set a password but he not tell me. Firmware maybe : V1.12(AAEZ.0) Can you give me a assistant please? Thank you
