-
Why is my EMG2926 not working as a print server
I have an old usb printer (lexmark) connected into the USB port of the EMG2926. I see the printer on the admin page of the router but not from my computer .. help? #CPE_Oct_2018
-
PLA4101Does not work with windovs any more?
Hello my inner network with zyxel PLA4101 does not work anymore. any Ideas? #PLA_Sep
-
Google Home Mini WiFi connection issues.
Hello :) i have a VMG8324-B10A with firmware 1.00(AAKL.14)C0 ( i got from my ISP website ) since about a month i have a google home mini device. at setup it worked fine and everything went smooth. but after a few days it started losing connection to my router. after resetting both devices i finally got it to see my wifi…
-
VMG8823-B port forwarding on 4g connection
Hi everyone, I have a problem with port port forwarding. I set up some rules in port forwarding menu with fiber connection and it works correctly. I have also set up a 4g connection for failover with a usb router and when the fiber line is down it activates the secondary 4g line but port forwarding's rules don't work. I…
-
Zyxel VMG4825-B10A modem will not connect to internet after power loss
My two neighbors and I are all having the same problem. When the power goes out the modem turns on but does not connect to the internet. It takes up to three hard restarts to get it to connect. Is there a solution. #CPE_Sep
-
vmg4825-b10a Network drive not working
I have a USB drive connected to the router & set the shares to enabled & selected the directories to be public but nothing shows up on my pc's. #CPE_Sep
-
Blocking internet radio and video streaming
Please I need guide lines on how to block internet radio and video streaming on zyxel UAG2100. #Biz_Security_Aug
-
AMG1001-T Is it ok for the modem not to have an IP connection?
The Internet LED indicator has the status off, but I have an internet connection. What does this mean? Is it ok for the modem not to have an IP connection? #CPE_Sep
-
How do you get the zyxel out of stand by mode?
i have a pla5456 attached to my samsung smart tv. It works great, however when it goes into standby, it will not reconnect unless i unplug the zyxel from the wall and plug it back in #PLA_Sep
-
настройка Zyxel q1000z
как настроить это чудо для россии (Ростелеком)? #CPE_Sep
-
Firmware upgrade Zyxel AMG1302-T11C
My Zyxel AMG1302-T11C has firmware V3.00(ABCG.10)R1 and I'd like to upgrade to the latest V3.00(ABCG.13)C0 as per https://www.zyxel.com/support/DownloadLandingSR.shtml?c=gb&l=en&kbid=M-02433&md=AMG1302-T11C#searchZyxelTab4 The option to upgrade the firmware is not present in the menu in the admin portal of the router. I…
-
AMG1001-T Cannot access the login screen for the modem/Internet settings on 192.168.1.1
Hi, I just bought the AMG1001-T Series ADSL2+ Modem, but I cannot access the login screen for the modem/Internet settings on IP address 192.168.1.1 I've been through the troubleshooting steps in the manual, making sure I was using Internet Explorer (I also tried IE Edge), Java was installed and enabled in the browser,…
-
Wap3205 v3 switch in AP mode
Hi, does anyone know if the wap3205 v3 will operate as a switch when it is in AP mode? Many thanks #Repeater_Sep
-
WiFi speed
I have very slow WiFi on the 3rd floor on my house and I need to know if this will help and how many I need to get to the 3rd floor 2 or 3 also if I do purchase can I plug the one on the 3rd floor into my pc. Thanks very much Oliver. #Others_Sep
-
SNMP on VMG8823
Hi all, I’m trying to use SNMP on a VMG8823 to monitor some values from the “xDSL Statistics” page, is that possible? I couldn’t find any information at all regarding SNMP on this device (ch. 34 on the manual is almost useless). I think I have figured out the following OIDs, Uptime: (1.3.6.1.2.1.1.3.0) Bytes Received:…
-
PLA5456
My PLA5456 will not connect. I live in a condo where the electrical meter is for the whole building not just my unit. My local unit and remote will not link up. Have I followed the following start up sequence? 1- I plugged both units into power: 2 - connected local via ethernet cable to router and connected remote to…
-
VMG1312-B10D Wireless bandwidth
My VMG1312-B10D (supplied by iTalk) has the latest firmware but switching it from 20MHz to 40MHz bandwidth makes no diffrence - it stays in 20MHz mode (confirmed by the wifi analyzer on my phone). Is this a known issue and is there anything which can be done to make it work as expected? #CPE_Sep
-
VMG8924-B10A LAN Ports Intermittent Failure
The LAN ports fail intermittently, however, the WiFi continues to work. When the LAN ports fail, the internet connectivity is lost only on the LAN ports. A restart of the router fixes this temporarily. Any suggestions on why this is happening? #CPE_May
-
VMG1312 dropping ICMP
Hello everyone I have a VMG1312-B10A which is connected to the internet via VDSL. I'm monitoring this VMG from an external server by sending pings every minute. Now the issue is, that the VMG - seemingly - randomly drops a few pings every now and then. From the logfiles I've gathered that the ping is being marked as an…
-
Bridge Mode on Telus Home
Recently upgraded to Telus 150. Despite assurances from Telus that the Actiontec T3200M could be Bridged - it can't - still running NAT and serving private IPs via DHCP. Customer service says they no longer provide bridge-capable devices to home accounts. I acquired the Zxcel VMG4325-B10A VDSL2 router. At first nothing I…
