-
VMG1312-B10A looses wifi with latest firmware
Having this annoying issue after ver(AAJZ10)C0. all most all the devices connected through wifi connects/disconnects without internet or limited internet access messages. Ethernet connection works though. I downgrade from verAAJZ13 to AAJZ10 and all works fine on wifi connection. any also having these kind issues with this…
-
VMG3925-B10B Stop Routing between LANS
I Have two Lan Groups Default 192.168.1.x Office 192.168.2.x Subnet Mask 255.255.255.0 At the moment I am able to ping between the two Lan's I would like to prevent LAN to LAN traffic. Any thoughts would be good. Cheers Rob #CPE_April
-
user and pasword for amg1302-t10c
hi , i reset mi modem and i can't enter with the default user-password admin-1234 , i read the forums and the guides but they are about amg1302-t10B and i have the amg1302-t10c and i don't found a guide for my modem. thanks #CPE_Aug
-
Modem AMG1302-T15C password under it is not correct....what can i do?
hello. im from Brazil and i use the Modem AMG1302-T15C. but i can´t acess using the ip adress cause the password under the modem is not right. what can i do? #CPE_Aug
-
How to use Armor X1 in a bridged network?
I have a separate firewall and Zyxell repeater connected to it to be a wireless network provider. How should I connect Armor X1 to be as a wifi extender? #Repeater_Aug
-
Chromecast and how to turn off AP Isolation
I recently updated my modem to the Zyxel C3000Z which is really the VMG4825 I believe. I have been having trouble chromecasting and read that I need to turn off AP (access point) isolation on my router however I do not see that option available. I have also read that AP isolation can be called different things like, client…
-
VMG8823-B50B only one led blinking
Hello All, I got a problem with my router and the problem is that only one led is blinking and nothing is working as it should. There is no way to access the router over the nw. The LED is the first from left looking at the router. I tried to reset the router pushing the restore button but nothing changed. Any hints? Many…
-
GS1200-8 IPv6 neighbor discovery multicast on VLAN not filtered properly?!
Hello,I observed this strange behavior on my GS1200-8 switch, that IPv6 neighbor discovery multicast packets are not filtered properly according to their VLAN-ID.The attached picture shows the VLAN configuration. Port 1 and 2 are used for trunking to the router and another managed switch. All the other ports show the…
-
MES3500-24
П осле замены модуля питания ,повреждённого гразой не загружается SYS. #Others_July
-
badly working ZyXEL P-2812HNU-F1 vT SN: S120Y11301328
Is it possible to RMA a broken unit when it not working as it should do? It can disconnect to internet and have a slow ping time that indicate internal problem. #CPE_July
-
How do you upgrade to Latest Firmware on PLA4201 v2
Hi there. I am new to this forum. I have a PLA4201 v2. Kindly let me know where to get latest firmware update and how to update it. (with which program) Links please Please Help. Thanks a million Kind Regards #PLA_July
-
My Router Causes Lag Spikes Which Last For Minutes
My wifi signal booster sometimes causes lag spikes for minutes. For instance think as if i am playing an online game. My ping is 45-50, playing without any problem. Then suddenly something happens and my ping goes up to +1000 for like 3-4 minutes. Meantime, I literally can not post a single text from internet. I can not…
-
pptp
Hi. 1) I create pptp connect from keenetic to my web server. According web gui keenetic connect successfully. But i have no ping from keenetic to other side pptp and from web server to pptp side on keenetic. 2) I have a network on web server. I wanna create traffic from keenetic to this network. That is why i try create…
-
HUGE Lag spikes
So here we go: i have this config: first Keenetic Ultra black one gets the internet cable with l2tp, it stays near entrance to my flat. In next room i have keenetic extra, it's working in repeater mode but recently I got an issue. For some reason i have huge lag spikes, ping could be 2-5k instead of 30 ms for example for…
-
Where can I find the configuration utility for PLA4231
Where can I find the configuration utility for PLA4231? All I found was software which gave info on the device but I was unable to do anything with it #PLA_July
-
Serial port setting
good day. i just want to ask if anyone knows serial port setting of OLT2406? #Others_July
-
LTE7410 Not connecting to 4G
Hi, I just got my LTE7410. UK Vodafone. In the location where it is I get 3 bars on my iPhone X and 4 bars on my Audi (which also has a SIM). So plenty of signal. The LTE7410 is 5 metres in the air up a pole so it should have even better strength. However, when I set it up, configure an APN with the UK vodafone settings…
-
VMG8823 - increase number of "static DHCP" entries: is it possibile ?
HI all, I'm using a VMG8823-B50B given me by Wind/Infostrada. I'm used to assign to a lot of devices a predefined IP using the "address reservation" (static dhcp) in order to control them (eg: presence detection). Using this ZyXEL device it seems that it is possible to reserve only 8 IP. Is it correct? Is there e…
-
At Wits End With PLA4231
I'm trying to extend my WiFi network to my bedroom, which has a very low signal, and got the PLA4231 on the advice of a friend. So far the videos online have been totally useless, and the documentation online is very poorly written and hard to understand. Nothing I seem to try works - connecting the extender to my…
-
aç kapa aç kapa sıkıldım
VMG1312-B10dI have been using this device for 2 months and need to switch it off every 3 days. #CPE_July
