-
XGS1210-12 Ability to label ports
Great switch! The ability to label ports in the web interface would be very useful to keep track of what is connected to each one. Thanks
-
Adding hardware monitor SNMP features on Layer 2 smart managed switches.
In response to the requirements raised by user @FlamencoAssassin , we propose integrating SNMP-based hardware monitoring capabilities into our Layer 2 smart managed switches. This suggestion originated from the discussion found here: SNMP hardware monitoring of XS1930-12HP and XGS1930-28HP switches — Zyxel Community If…
-
Nebula Switch Authentication supports Compound Authentication configuration
User @SkyGoat hopes Nebula Switch Authentication can support Compound Authentication configuration. This allows users to configure not only 802.1X but also MAC auth for authentication ports. In addition, the current Nebula switch model that supports the Compound Authentication feature are GS2220 and XGS2220. Original post
-
SSH: Implement SSH Public Key Authentication
Hi, I have got a suggestion for future ZyNOS releases: It would be great to be able to log into the switch using an SSH Pubkey instead of password. Using pubkeys would increase security (especially combined with a possibility to disable password auth for SSH) and make scripting/automation easier as wrappers like sshpass…
-
Support port dampening for Zyxel switch
User RSaull proposes that Zyxel switch supports the "port dampening" feature. Feel free to give a vote if you also like this request. Original post
-
Hardware monitor on XGS1250-12
User @BranMan has proposed adding a hardware monitor to the web GUI of the XGS1250-12 in the following thread: https://community.zyxel.com/en/discussion/21898/does-the-xgs1250-12-have-use-active-cooling If you like this idea, please leave a comment or give it a vote!
-
Improve the UI for Selecting Staking Slot IDs
User @otello1 has suggested enhancing the Slot ID UI interface to prevent users from entering the same value on multiple switches in the same stacking switch. This idea was discussed in detail within the following thread: https://community.zyxel.com/en/discussion/comment/64443#Comment_64443 If anyone likes this idea,…
-
Dynamically update XGS1250-12 system page information
User @gordonre has suggested that the switch XGS1250-12 could benefit from dynamically updating system page information. This idea was discussed in detail within the following thread: https://community.zyxel.com/en/discussion/comment/63833#Comment_63833 If anyone likes this idea, please feel free to leave a comment or…
-
XMG1915-18EP: Support SNMP OID for cpu temp
User @clarkyjp proposes that XMG1915-18EP supports SNMP OID for CPU temp Feel free to give a vote if you also like this request. Original post
-
Port Labels or Descriptions for web managed switches
It's a small thing but; being able to give an individual port on a web managed switch a label, or "description" in CLI parlance, would be helpful especially if/when Zyxel supports SNMPv1 or better. I use "descr" on my Arista and Nortel/Avaya switch ports so that I don't have to backtrack and re-label ports in management…
-
XMG1915-10EP: Support PoE Power consumption over SNMP for each Port
User @DaveBr proposes that XMG1915-10EP supports PoE Power consumption over SNMP for each Port Feel free to give a vote if you also like this request. Original post
-
Support ECDSA certificates on GS1900 series switches
Based on a suggestion from user @coderjoe , we would like to propose the implementation of a feature that supports ECDSA certificates on GS1900 series switches. This topic was raised in the following discussion:…
-
Improved LAG algorithm type
So this is what everyone wants and no one had done it. Put simple this algorithm would be like a deck of cards (packets) with players (ports in a LAG) and all you do is send one card down to one player next card to the next player and loop back around. It will work great regardless of packet size
-
XGS1250-12 Additional Information on Port Status
To address the need for a quick view of VLAN information suggested by @gordonre, he propose to enhance the System tab display of the XGS1250-12 switch's Web GUI. This would offer a simple and efficient overview of the user's VLAN setup, making it more convenient and productive to manage. This topic was raised in the…
-
Adjust timeout for XGS1250-12
Considering that it may take a long time to configure multiple units and systems, it is suggested to adjust the timeout settings of the XGS1250-12 Switch, as inquired by user @gordonre in the following thread: https://community.zyxel.com/en/discussion/16913/xgs1250-12-ability-to-configure-webpage-logout-time If you agree…
-
XGS1250-12: Show Device Name on the login page
I have two XGS1250-12 in my network. For identification it would be very helpful to see the individual Device Name instead or in addition to the model name on the login page. A customizable text would be even better.
-
Make the VLAN setting of LACP/LAG ports can be synchronized
User @hades proposes that Make the VLAN setting of LACP/LAG ports can be synchronized. Please help to give a vote if you also like this request. Original post
-
Feature request: Fan control of XGS1250
User @Frantik85 proposes that * It's good to have an option/button to activate the fan. Please help to give a vote if you also like this request.
-
Feature Request: Zyxel switch supports DHCPv6 Option 39
User @Kallewirsch requested Zyxel switch supports DHCPv6 Option 39. If anyone likes this idea, please feel free to leave a comment or click vote. Original post
-
FDB on XGS1210 & XGS1250
I really would the like to be able to examine the Forwarding Data Base of mac-addresses on my XGS1210 and XGS1250. When trying to solve network problems, this can be essential, and since the data is already there, it should be easy to display it in the web i/f.
