-
Howto change ip address of GS1910-24 ?
I tried to change the ip address of my GS1910-24 via the Web interface, but no success. After clicking on "apply" the connection is gone. This is quite unterstandable, as the new address belongs to another network. But even if I connect the switch to the new network, I cannot connect to the new address. After rebooting the…
-
GS1910-24HP Boot Problem
Mein GS1910-24HP startet nicht mehr. Es ist die neueste Firmware drauf. Beim Umstellen auf einen andren IP Kreis machte er Probleme. Ein Reset mit der Console half am Anfang. Jetzt meldet er beim Start auf der Konsole Image loaded from 0x80040000-0x809ab278 RedBoot> go Press ENTER to get started% Error in file…
-
GS1910 Factory Reset no User/IP Management
Hello, i bought a second hand GS-1910 switch. The switch runs firmware 2.00. I can access the webinterface with the brwoser and login with "admin" and "1234". After I logged in the first time, there were no "IP" button in the system category. And no "User" butten in the Security → Switch category. In this category only the…
-
not enable to login
After upload and apply new firmware runtime-GS1900-48HPv2-V2.70(ABTQ.5).bix into GS1900 8HP I'm not able to login admin/1234. I tried reboot switch manually, but the same result "The user name or password is incorrect." What I should to do to fix it?
-
ABOUT GS1900-16
請問GS1900-16是否有台灣製造?可去那裏購買?
-
GS1900-10HP / 24HP get Consuming Power via SNMP
Hello, is it possible to get the Consuming Power for each Port via SNMP for the GS1900-10HP or GS1900-24HP? With the MIB Browser I do not see these values. Are they not availible? Regards, Chris
-
GS1900 series--password resets on firmware update? Also, config propagation?
I noticed that when I update the firmware on my several GS1900-series switches, after a reboot, the password is reset to 1234 and SNMP config is reset. I have no VLAN set up yet, so I don't know if the switch simply does a device reset and loses the config after the firmware update? Is this normal? If not, what did I do…
-
GS2200-48 Switch Firmware and MIB File. Where to find ?
Hi to all, I've been looking for firmware and MIB file (SNMP) for this device for a long time now. Can anybody help ? Thank You bye Kepir
-
Archive Firmware and MIB Files ! Please !
@Zyxel_Melen Hi Melen, As i understand there is no link to get archive firmware. I need also Firmware and MIB Files for those Equipment please : USG310 NXC2500 GS2200-8 GS2200-8P GS2200-24 GS2200-24P GS2200-48P GS2210-48 GS3700-48 NWA5123-NI
-
GS2210 switches lates firmware
Hi The latest firmware I found is 4.50_4. I happen to have several types of GS2210 series switches at many customers and I'm little embarrassed to run so old firmwares on those relatively expensive switches. Am I missing here something or is it really so that year 2020 is the latest date firmwares were published?
-
GS2200-24 and GS2200-24P Switch Firmware and MIB File How to find ?
Hello! I have two switches for which the passwords are unknown (GS2200-24 and GS2200-24P). I know that you can download the firmware through the com port. But these devices are not supported (end of life). Where can I find firmware for these devices?
-
Arris SB8200 modem (2G) LAG + pfsense with XGS1250-12
Hello, I feel like this is all so new to me and I'm trying to solve an issue that my current Asus router cannot solve. Long story short is that the WAN aggregate feature on my Asus AXE7800 gets greatly reduced when I connect the 2.5gbe port to the Zyxel switch. I'm getting ready to move to something more flexible such as…
-
Clients connecting to APs through a Zyxel GS1920 not reaching the RADIUS server
I replaced my Cisco switch with a Zyxel GS1920. Figured out all the VLANs and internet is working great. The problem I am running into I have a Network Policy Server (NPS) to authenticate users to an employee network. This worked fine in the old Cisco switch, but now it stopped working. I added the IP to the NPS server and…
-
How to get Zyxel ES3500-24 firmware?
My device always reboot itself, I need a firmware to upload via console. Please kindly help. tks! :)
-
Weird GS1915 series default
As stated by manual: management address is (still the useless limitation to not user-allow copy from PDF manuals… worked around without using Adobe Reader). http://setup.zyxel or http://DHCP-assigned IP or http://192.168.1.1 The latter is the same default address of every Zyxel router and firewall. It seems a bit…
-
Cannot ping anything from GS1920 switch, but can ping from a device on the network
Similar to my last question I have not been able to figure out why I cannot communicate outbound. I cannot ping the gateway IP or anything else. I have the gateway and DNS servers added.
-
GS1915-8 Initial Firmware upgrade stuck
Yesterday I began installing my new switch, choosing to do the firmware upgrade. It is now the following day and the light on the switch is still blinking. How long should it take for the upgrade to be finished? What can I do to fix this since it is not even finished with its installation?
-
XGS1250-12 and SFP+ 10GbE Transceiver compatibility
Hello! I was looking for a managed switch that has at least 4x 1G/2.5G/5G/10G RJ45 ports and 4x-6x 1G (or faster) ports. I came across the XGS1250-12 switch and it is great in terms of cost and features. The only thing I see is that the 4th 10G port is SFP+ and the datasheet doesn't list the SFP10G-T transceiver. When I…
-
Issues with firmware upgrade GS2210
Hello colleagues! I'm having some issues upgrading my GS2210 switches to latest patch 4.50 (AASP 4). So far on 3 switches(2x GS2210-8 and 1x GS2210-24) running 4.50 (AASP 2), when I'm trying to upload the new firmware file, the browser displays uploading percent, but the progress bar doesn't display. Also, the upload ends…
-
GS1900-HP24 help missing after upgrade from 2.6 to V2.70(AAHM.5)
The embeded help is missing from the console management, give broken url message. The application notes stated the help is now web based (as was the previous 2.6 version i think). I rebooted switch twice after firmware update. Any ideas?
