-
Can I connect non-PoE devices to the PoE GS1900-8HP Switch?
If it is possible then how to disable power for POE port and use it as a regular LAN port? Thank you. #Biz_Switch_Oct_2018
-
Two internet connections with two vlans
Hello,I have an gs1900-48 with this firmware V2.40(AAHN.1)_20180705.I have two internet providers and i want to make two separate vlans each with it`s own internet conn.Because i want them separately i didn`t create a trunking port.Vlan1 (default) is with all the corresponding ports untagged and excluded for the vlan2…
-
GS1900-8 switch randomly reset/reboot (Fixed)
Hi guys, I'm having really a bad experience with a Zyxel Switch GS1900-8. It keeps rebooting without any valid reason. I upgraded to last available firmware (2.40) but nothing, still same issue. On syslog I don't get any message. Just "WARNING" "reboot" Any help ?
-
XGS2210-52HP VLAN Trunk Port Configuration
Hi Guys, I'm new to the world of VLAN's. Please bear with me. We have 3 XGS2210-52HP switches uplinked from fiber SPF ports. VLAN's have been configured. From VLAN Port Setup, I select VLAN Trunking for PVID created and SFP port. When I Apply, the switch looses connectivity with network. Only option is to power cycle…
-
QoS at Speedlink 5501
Hello Sorry, this is a DSL-Router and not a switch. I didn't find a group for Routers. But it has simmilar switch functionality ;) I have a device which is configured as followed (factory settings): I can't interpret/understand the column "Bandwith Allocation" and "QoS Interface" :/ - make it sense to define "0 Percent"??…
-
XGS3700 VLAN Configuration
i'm new witch Zyxel Switches VLAN Configuration and actually i cant configure the XGS3700 as it should be! On Port 1 i like to have an VLAN Trunk port with my VLAN 10 and the default VLAN1 as an uplink to a Netgear Switch. how can i configure this? on Port 10-16 i like to have the following configuration: VLAN 1 untagged…
-
Port Based VLAN is not working.
I'm guessing its the same
for all ZYXEL switches with this option but I have tried to get the
GS2200 to work with a Proxy ARP setup so far the only way is to use a
Netgear GS105E that does Port Based VLAN correctly. You might be thinking
why not use 802.1Q VLAN and the reason for this is double packets
happen with the…
-
Switch GS3700 is not booting
Turning Power off and on did not help. After booting it show message in console like in picture above. How to fix it ?
-
Can I change the inactivity time?
The inactivity time before it logs me out is much toooooo short can I change it?
-
2 port lacp group. How to join with vlan
How add trunk port to vlan. I mean between two switces is connected with two cables (2 gbps trunk link) What is configured to tagged vlans-
-
GS1900-24E web interface on iPad
Any chance of doing some work on the web interface on the GS1900-24E? It doesn't display correct on an iPad, see: https://www.youtube.com/watch?v=kuLyRN-5gAc I am running the latest version: V2.40(AAHK.1)_20180705 | 07/05/2018 Also, on a desktop browser, it has a horizontal scrollbar with a big block of nothing to the…
-
GS1900-8 Switch CLI Reference Guide
Hi, In the latest firmware update allowed the switch GS1900-8 to be accessed via SSH. However, there is no reference CLI documentation anywhere. Also, the command "help" does not show anything. Does anyone knows if there is a CLI documentation for this switch? Thanks #Biz_Switch_Sep
-
Disable paging in CLI
Hi, I'm trying to disable paging on `ZYXEL IES-6000`, I have already read the user manual which wasn't useful. Just to clarify, by paging I mean "Press any key to continue, 'n' to nopause,'e' to exit". Is there anyway to get ride of it and receive the complete output at once?Any guidance is appreciated. Thanks in advance,
-
Interface GS1920-24
Hello, i have just a simple question with no solution yet. I bought my GS1920-24 and watched a youtubevideo for installation, but: The interface was totally different from what i had. There was a userfriendly interface, witch graphics of the switch to install https://www.youtube.com/watch?v=-Mp2O_digkg (minute 5:58) and…
-
GS1900-10HP WEB GUI Redesign
Hallo zusammen, ich habe mehre GS1900-HP10 Switche hier stehen und wünsche mir das alte Design zurück. Aktuell habe ich auf allen v2.40 drauf. Kann es sein, das ich v2.30 für das alte Design benötige? Leider kann ich das im Download bereich nicht finden... Über eine kurzfritige Rückmeldung würde ich mich sehr freuen. Mit…
-
Remote Port Mirroring on GS1920-24
Hello, I have a question to the mirroring function on the GS1920-24 Switches.I have two 1920-24 switches and they are connected via a LAG. I have a server on Switch 2 and want to get mirrored traffic from Switch 1. How can I achive that? In the menu, I can only find local mirroring but nothing about remote mirroring? I…
-
How to monitor/manage Zyxel GS1900-8 via SNMP on Zabbix
Hello, I trying to become familiar with test switch Zyxel GS1900-8. First I configure everything like I want to VLANs, LAGG etc. but now I'm trying to find out a way to monitor/manage this device via SNMP. I'm looking for any prepare packages on Zabbix repository but I found only for Zyxel Firewall. GS1900-8 is my testing…
-
GS1920-24HP firmware upgrade
Under the management -> maintenance -> current boot image -> firmware 1 is version 4.30 config boot image -> firmware 2 is version 4.50 So I saved conf under maintenace -> config1 Can I hit reboot system -> config 1 Can I be sure that new version (4.50) will boot up correctly together current configuration? Because I dont…
-
Arp spoofing warnings with GS1920-24 managed switch?
Hi I have a USG40, and a few cheap switches. I got hold of an GS1920-24 managed switch which replaced one of the other switches. It is connected to one of the USG40 ports. Shortly after that my network started behave strange, dropouts, missing local network connections, missing internet connection, warnings on my macbook…
-
Central Management of devices
I have several Zyxel POE+ switches, access points, and USG firewalls throughout the country. I am looking for an easier way to configure all of them from a single console to some degree, does Zyxel offer anything like this? They claim this "ZON Utility" can do so much, but I cannot get it to scan outside of one network,…