function of ONVIF on GS1350 switch

Siu_kit1

I have a GS1350 Switch where connecting to VIVOTek FD8169A, FE8181V  IP Cam (ONVIF compatibile), and enabled the ONVIF feature on the swtich.

Would you please tell me where to get the IP Cam information on the switch, please ?

Zyxel_Chris

Hi @Siu_kit1

For your first question you can find the detail information in "Neighbor Detail" which is in the top right corner in Summary page.

For your second question PD health is red could be switch cannot get LLDP from the camera or the camera did not respond switch's ping request.  User Guide. Page 85, you can check if your camera has sending out the LLDP or can answer the ping request.

Zyxel_Chris

@Siu_kit1

It's in the same page, the Yellow means the switch is restarting the PD by turning power off and on. Green is switch can successfully discovered the PD's LLDP or ping reply.

For more detail you can refer to this link on page 85

Zyxel_Chris

@Siu_kit1

FYI,
You can also refer how to configure the auto PD recovery.
Centralizing your video surveillance network management on Nebula Cloud

Also, here is the Video Tutorial for Surveillance Mode

https://www.youtube.com/watch?v=3cZMtsOT7nc

Siu_kit1

One more question, the PD Health red in color is normal or warning ?

Zyxel_Chris

Hi @Siu_kit1

For your first question you can find the detail information in "Neighbor Detail" which is in the top right corner in Summary page.

For your second question PD health is red could be switch cannot get LLDP from the camera or the camera did not respond switch's ping request.  User Guide. Page 85, you can check if your camera has sending out the LLDP or can answer the ping request.

Siu_kit1

thx

Siu_kit1

Sorry Chris,

What about it changed to amber or green color ?

Zyxel_Chris

@Siu_kit1

It's in the same page, the Yellow means the switch is restarting the PD by turning power off and on. Green is switch can successfully discovered the PD's LLDP or ping reply.

For more detail you can refer to this link on page 85

Siu_kit1

Hi Chris,

thx !!

Zyxel_Chris

@Siu_kit1

FYI,
You can also refer how to configure the auto PD recovery.
Centralizing your video surveillance network management on Nebula Cloud

Also, here is the Video Tutorial for Surveillance Mode

https://www.youtube.com/watch?v=3cZMtsOT7nc