Help with vlan trunk migration: Huawei -> Zyxel GS2210

DTI
DTI Posts: 2
Hi!

I'm new on Zyxel world and its is harder to understand the vlan conf.

I need to create vlan trunk, but can't do with zyxel.

Anyone can help with migration from huawei conf to zyxel?


Huawei:

interface Vlanif50
 ip address 172.16.50.1 255.255.255.0

interface GigabitEthernet0/0/1-15, 17-24
 port link-type hybrid
 port hybrid pvid vlan 16
 port hybrid tagged vlan 1001
 port hybrid untagged vlan 16

interface GigabitEthernet0/0/16
 port link-type trunk
 port trunk pvid vlan 50
 port trunk allow-pass vlan 10 16 50

interface GigabitEthernet0/0/25
 port link-type trunk
 port trunk pvid vlan 8
 port trunk allow-pass vlan 8 13 50 1001
#
interface GigabitEthernet0/0/26
 port link-type trunk
 port trunk allow-pass vlan 8 50 1001
#
interface GigabitEthernet0/0/27
 port link-type trunk
 port trunk allow-pass vlan 2 to 4094
#
interface GigabitEthernet0/0/28
 port link-type trunk
 port trunk allow-pass vlan 2 to 4094

Accepted Solution

  • DTI
    DTI Posts: 2
    Accepted Answer
    Hi @DTI,

    Welcome to Zyxel Community.

    I help you to migrate your configuration as following:

    Please copy and paste to switch
    vlan 1
      normal 1-28
      fixed ""
      forbidden ""
      untagged ""
    exit
    vlan 8
      normal 1-24,27-28
      fixed 25-26
      forbidden ""
      untagged 25
    exit
    vlan 10
      normal 1-15,17-28
      fixed 16
      forbidden ""
      untagged ""
    exit
    vlan 13
      normal 1-24,26-28
      fixed 25
      forbidden ""
      untagged ""
    exit
    vlan 16
      normal 1-15,17-28
      fixed 16
      forbidden ""
      untagged 1-15,17-24
    exit
    vlan 50
      normal 1-15,17-24,27-28
      fixed 16,25-26
      forbidden ""
      untagged 16
      ip address default-management 172.16.50.1 255.255.255.0
    exit
    vlan 1001
      normal 16,27-28
      fixed 1-15,17-26
      forbidden ""
      untagged ""
    exit
    interface port-channel 1-15,17-24
      pvid 16
    exit
    interface port-channel 25
      pvid 8
    exit
    interface port-channel 27-28
      vlan-trunking
    exit

    Please let us know if there is any missing configuration.
    Hi, thanks to reply! I'll try this.

    You can give me some tips about vlan trunk?

    I'm confused with "normal / fixed / forbidden / tx tagging"

All Replies

  • Zyxel_Adam
    Zyxel_Adam Posts: 137  Zyxel Employee
    edited May 4
    Hi @DTI,

    Welcome to Zyxel Community.

    I help you to migrate your configuration as following:

    Please copy and paste to switch
    vlan 1
      normal 1-28
      fixed ""
      forbidden ""
      untagged ""
    exit
    vlan 8
      normal 1-24,27-28
      fixed 25-26
      forbidden ""
      untagged 25
    exit
    vlan 10
      normal 1-15,17-28
      fixed 16
      forbidden ""
      untagged ""
    exit
    vlan 13
      normal 1-24,26-28
      fixed 25
      forbidden ""
      untagged ""
    exit
    vlan 16
      normal 1-15,17-28
      fixed 16
      forbidden ""
      untagged 1-15,17-24
    exit
    vlan 50
      normal 1-15,17-24,27-28
      fixed 16,25-26
      forbidden ""
      untagged 16
      ip address default-management 172.16.50.1 255.255.255.0
    exit
    vlan 1001
      normal 16,27-28
      fixed 1-15,17-26
      forbidden ""
      untagged ""
    exit
    interface port-channel 1-15,17-24
      pvid 16
    exit
    interface port-channel 25
      pvid 8
    exit
    interface port-channel 27-28
      vlan-trunking
    exit

    Please let us know if there is any missing configuration.
    Adam
  • Zyxel_Adam
    Zyxel_Adam Posts: 137  Zyxel Employee
    @DTI,

    Thanks for your reply.

    Kindly provide you description as below:




    For "tx tagging", selected it means tagged and unselected it means untagged for the port.
    Adam