Support unicast and switch of broadcast on DHCP

Zyxel_Charlie

This discussion was created from comments split from:Deutsche Telekom ENTERTAIN (IPTV) Support / WHEN?
Description:
Support to activate, deactivate DHCP Broadcast Flag, as for ENTERTAIN it's required to set it to '0', means Unicast.

Zyxel_Emily

This feature is supported in firmware 4.32 and later versions.

Use the commands to activate/deactivate DHCP broadcast flag.

Router(config)# interface wan1

Router(config-if-wan1)# ip address dhcp unicast

Router(config-if-wan1)# exit

Router(config)# write