ZyXEL GS1900-10HP Switch Configuration

kön
kön Posts: 1
Sehr geehrte Damen und Herren,


ich habe das Problem, dass auf den Ports 02, 03, 04, und 05 keine Verbindung möglich ist.
Die Verbindungen auf der Firewall/ESX sind richtig angelegt, es funktioniert auch über die SSID über den AP´s (Port 06 und Port 07).
Die IP Vergabe wird über DHCP vorgenommen. Ich bekomme auf den Port, aber auch keine DHCP Adressen.
Im WLAN bekommme ich die richtige IP. Die AP sind Multi SSID fähig.


Die Frage ist nun, ob ich auf dem Switch etwas falsch eingerichtet habe?


So soll es sein:
Port 01        ESX        untaged 01        Tag 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 50  
Port 02        Printer        untaged 50        
Port 03        MGMT        untaged 03        
Port 04        PC1        untaged 05        
Port 05        PC2        untaged 05        
Port 06        AP EG         untaged 04        Tag 02, 05, 09, 10, 11
Port 07        AP KG        untaged 04        Tag 02, 05, 09, 10, 11
Port 08        Uplink        untaged 01        
Port 09        not use        Forbidden
Port 10        not use        Forbidden


Das ist meine Config:

! System Description: ZyXEL GS1900-10HP Switch
! Revision: A1
! Serial Number: xxxxx
! MAC Address Range:
! Boot Version: V2.0.0.0 | 07/17/2015
! Firmware Version: V2.60(AAZI.3) | 01/05/2021
! System Up Time: 29 days, 12 hours, 53 mins, 5 secs
!
!
!
ip dhcp
username "usera" secret 8 key
vlan 2
 name "Gast0002"
vlan 3
 name "Management0003"
vlan 4
 name "WLANAP0004"
vlan 5
 name "internalNetwork0005"
vlan 6
 name "Tor0006"
vlan 7
 name "ESX0007"
vlan 8
 name "WAN0008"
vlan 9
 name "WORK0009"
vlan 10
 name "LAB0010"
vlan 50
 name "Printer0050"
voice-vlan oui-table 00:E0:BB "3COM"
voice-vlan oui-table 00:03:6B "Cisco"
voice-vlan oui-table 00:E0:75 "Veritel"
voice-vlan oui-table 00:D0:1E "Pingtel"
voice-vlan oui-table 00:01:E3 "Siemens"
voice-vlan oui-table 00:60:B9 "NEC/Philips"
voice-vlan oui-table 00:0F:E2 "H3C"
voice-vlan oui-table 00:09:6E "Avaya"
!
!
!
!
!
spanning-tree mst configuration
 name "xxx"
!
!
!
snmp community "RANDOMKEY"  rw
!
!
no ip ssh
!
!
management access-list default
!
interface lag1
 switchport hybrid allowed vlan remove 1
!
interface lag2
 switchport hybrid allowed vlan remove 1
!
interface lag3
 switchport hybrid allowed vlan remove 1
!
interface lag4
 switchport hybrid allowed vlan remove 1
!
interface lag5
 switchport hybrid allowed vlan remove 1
!
interface lag6
 switchport hybrid allowed vlan remove 1
!
interface lag7
 switchport hybrid allowed vlan remove 1
!
interface lag8
 switchport hybrid allowed vlan remove 1
!
interface 1
 switchport hybrid vlan-trunking
 switchport hybrid allowed vlan add 2-10,50 tagged
 speed 1000
!
interface 2
 switchport hybrid allowed vlan add 50 untagged
 switchport hybrid allowed vlan remove 1
!
interface 3
 switchport hybrid allowed vlan add 3 untagged
 switchport hybrid allowed vlan remove 1
 speed 1000
!
interface 4
 switchport hybrid allowed vlan add 5 untagged
 switchport hybrid allowed vlan remove 1
!
interface 5
 switchport hybrid allowed vlan add 5 untagged
 switchport hybrid allowed vlan remove 1
!
interface 6
 switchport hybrid vlan-trunking
 switchport hybrid allowed vlan add 2,5,9-10 tagged
 switchport hybrid allowed vlan add 4 untagged
 switchport hybrid allowed vlan remove 1
!
interface 7
 switchport hybrid vlan-trunking
 switchport hybrid allowed vlan add 2,5,9-10 tagged
 switchport hybrid allowed vlan add 4 untagged
 switchport hybrid allowed vlan remove 1
!
interface 8
!
interface 9
 switchport hybrid allowed vlan remove 1
!
interface 10
 switchport hybrid allowed vlan remove 1
!
!
!
!

Answers

  • Zyxel_Jonas
    Zyxel_Jonas Posts: 241  Zyxel Employee
    Hi @kön ,

    Welcome to Zyxel Community!
    Based on the symptoms I assume that these devices doesn't supports to sends VLAN tagged, you'll need to configure "PVID" on port 2,3,4,5 with the specific VLAN. For the APs, it works normally as APs has the ability to sends VLAN tagged. 

    Steps as follow:
    1. Go to Configuration > VLAN > VLAN > Port, choose port 2.
    (I've used port 2 as an example.)


    2. Click on "Edit" button located at the bottom of the page.


    3. Configure 50 (VLAN) on PVID, and then click on "Apply" button.


    Verification:
    1. The page will be re-direct to port page, and you'll see the configuration as below:


    2. Configuration file will look like below:


    Hope it helps,
    Jonas,
    Jonas,