DHCP on VLAN for Guest Wifi does work
chr_sergey
Posts: 5
I configured on my USG FLEX 200 2 SSID (via WebInterface)
WLAN STAFF - VLAN-ID 1 (default)
WLAN GUEST - VLAN-ID 17
USG FLEX 200 connected to GS2220-50 on port 44.
GS2220-50 connected to GS2210-48 on port 41.
Two access points WAC 6103D connected to GS2220-50 on ports 3 and 4.
Now I am facing the problem, that I can connect to "WLAN_guest" but get an APIPA adress, the DHCP does not provide an 192.168.50.0 address and I have no clue why....
Any ideas what I fail to see here?
May be need configure VLAN on SW GS2220-50 and GS2210-48?
How configure vlan17 on GS2220-50 and GS2210-48 for Guest ssid?
0
All Replies
-
Hi @chr_sergey,
Here is a scenario for reference setup :
1- Configure switch’s ports as fixed and Tagged:
2-Create VLAN17 in your USG FLEX 200 (Configuration > Interface > VLAN > Add)
3- Create security profile (Configuration > Object > AP Profile > SSID > Security List)
4- Create SSID profile (Configuration > Object > AP Profile > SSID > SSID List)
5- If you have managed AP, add into Mgmt list (Configuration > Wireless > AP Management > Mgnt. AP List > AP List)
6- Create AP Group Profile (Configuration > Wireless > AP Management > AP Group)
7-Add AP into listHere is the related KB for this scenario for your reference:
https://kb.zyxel.com/KB/searchArticle!viewDetail.action?articleOid=017406&lang=EN
0 -
0
Categories
- All Categories
- 415 Beta Program
- 2.3K Nebula
- 141 Nebula Ideas
- 94 Nebula Status and Incidents
- 5.5K Security
- 216 USG FLEX H Series
- 262 Security Ideas
- 1.4K Switch
- 71 Switch Ideas
- 1K Wireless
- 39 Wireless Ideas
- 6.3K Consumer Product
- 243 Service & License
- 382 News and Release
- 81 Security Advisories
- 27 Education Center
- 8 [Campaign] Zyxel Network Detective
- 3K FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 83 About Community
- 71 Security Highlight