IPSEC Client: Access to host via Site2Site VPN

Options
I have the following scenario: Users connect with the Zyxel IPSEC Client to the local network 192.168.37.0/24. Now these users should also be able to access resources which are connected via Site2Site VPN. I found the following article:

But this does not work, because from the client point of view only the network 192.168.37.0/24 is routed into the tunnel; there is also only such a policy on the Zywall:



Now how can I tell the VPN client that the Site2Site network should also be routed through the dialup tunnel? Set up a second Phase2 on the Zywall and on the IPSEC client? 

Thanks in advance for any help!
martin

Accepted Solution

  • Zyxel_Kevin
    Zyxel_Kevin Posts: 799  Zyxel Employee
    First Anniversary 10 Comments Friend Collector First Answer
    Answer ✓
    Options
    Hi @humschti
    Thanks your time today, the issue have been resolved after change Local Policy to the correct subnet. 
    Please feel free to contact me if any concerns. 
    Thank you
    Kevin

All Replies

  • Zyxel_Kevin
    Zyxel_Kevin Posts: 799  Zyxel Employee
    First Anniversary 10 Comments Friend Collector First Answer
    Options
    Hi @humschti
    Greeting Forum. Please kindly share your config file by private message.
    I will check if there is something missing. 
    Thank you
    Kevin
  • Zyxel_Kevin
    Zyxel_Kevin Posts: 799  Zyxel Employee
    First Anniversary 10 Comments Friend Collector First Answer
    Answer ✓
    Options
    Hi @humschti
    Thanks your time today, the issue have been resolved after change Local Policy to the correct subnet. 
    Please feel free to contact me if any concerns. 
    Thank you
    Kevin

Security Highlight