[SCR]How to Vlan on SCR device on Nebula

Zyxel_Jerry
Zyxel_Jerry Posts: 1,054  Zyxel Employee
First Anniversary 10 Comments Friend Collector First Answer
edited September 2023 in Other Topics

1.Navigate to Site-wide > Configure > Security router >Interface

2.Click “Add” on Lan Interface

3.Fill in the interface name, VLAN ID, IP address, and subnet mask and click “Ok”

4.Once you have made the changes, click "Save" to apply the new configuration to the SCR device. The Vlan interface will now be set on the lan interface.