Several VPN gateways USG FLEX 500

RiKa

A quick question about the USG FLEX 500. Is it possible to set up several VPN gateways in parallel?
I want to implement the following scenario:

VPN GW1 is set up and running. Users can access the internal LAN via L2TP/IPSEC from their devices.

VPN GW2 is new and should now connect our new office directly to the site-to-site VPN of the head office. A: USG60W > USG FLEX 500

Thanks for an answer

PeterUK

Yes that should be possible.

mMontana

I'd love to know how it should be, if you can @PeterUK

PeterUK

https://community.zyxel.com/en/discussion/comment/56239#Comment_56239

They have L2TP/IPSEC working for remote devices so all they need is the site to site.

Here is a run through

VPN gateway

IKEv2

interface WAN1

peer gateway

You need to know which end or both to be nailed up Static Address (can use domain name) to connect to the other end or Dynamic Address for the other end to connect to this end to be Site-to-site with Dynamic Peer

uncheck Enable Two-factor Authentication

VPN connection

Nailed-Up on one of the ends

Site-to-site with Dynamic Peer or Site-to-site depending how you setup VPN gateway

set your local/remote policy

routing rules add if needed

mMontana

Thanks for sharing.