[Mobile router] How to access the local GUI in Router mode?

Zyxel_Judy

Introduction

Typically, users select Router mode when using indoor mobile routers such as the NR5101 and FWA510. This FAQ is aimed at helping users of these mobile routers who are utilizing Router mode. We will provide a step-by-step guide on the different methods available for accessing the local GUI of your mobile router when it is set to Router mode.

Important Information:

• When using a setup like FWA510 connected to a PC (FWA510 — PC), the PC will receive an IP address from DHCP by the FWA510.

• Refer to our specific FAQ on usernames and passwords for login details.

Access Solutions

• Method 1: Via the default LAN IP address 192.168.1.1

• Method 2: Via Nebula’s Remote Configurator

Navigate to Nebula > Device > Mobile router > Live tool > Remote Configurator to get the link.

Use the provided link to access your router's GUI.

Note that: At the time of this writing, this feature is supported by the Nebula Pro Pack Organization.

• Method 3: Via Cellular IP address

Note that: The Cellular IP address may change after resetting the device or due to IP address release time if your SIM card doesn't receive a public IP from the ISP.

This IP will be found at the local GUI’s home page > Cellular Info

or Nebula > Device > Mobile router > Live tool > WAN status

For instructions on accessing the Mobile Router's local GUI in Router mode, please refer to this article.