How to disable AMPDU and AMSDU on Nebula AP by CLI?

Zyxel_Judy

When your IoT devices experience connection issues, you can try disabling AMPDU and AMSDU to see if the issue is resolved.

This instruction will use the radio profile "RADIO_SETTING_TYPE_2" as an example.

Step 1: Access the AP CLI

1. Find the management IP address of the AP.
2. Use an SSH client, such as Tera Term or PuTTY, to connect to the AP.
3. Enter the AP's management IP address and select SSH as the connection method.
4. Log in with the AP administrator account admin and password.
5. After successfully logging in, you should see the CLI prompt:

Router>

Note: If the AP is managed by Nebula, make sure you use the appropriate device credentials (site-wide password) for CLI access.

Step 2: Change the settings

Router> configure terminal

Router(config)# wlan-radio-profile RADIO_SETTING_TYPE_2

Router(config-wlan-radio RADIO_SETTING_TYPE_2)# no ampdu

Router(config-wlan-radio RADIO_SETTING_TYPE_2)# no amsdu

Router(config-wlan-radio RADIO_SETTING_TYPE_2)# exit

Router(config-wlan-radio RADIO_SETTING_TYPE_2)#

Router(config)# write

Router(config)# exit

Verification

Router# show wlan-radio-profile RADIO_SETTING_TYPE_2