Zyxel USG110 access VLAN Config

mike_bt

I have a Zyxel USG110 and an HP 1810 managed switch. I want to create two VLANs on port 5 of the Zyxel, which is directly connected to the HP managed switch. I intend to set up the two VLANs as access VLANs on the HP switch with the following configuration:

• Port 1 in WAN
• Ports 2 and 3 in VLAN 20
• Ports 5, 6, 7, and 8 in VLAN 30

In the HP 1810 switch, should I configure the ports as tagged, untagged, or excluded?

Thank you for your assistance!

PeterUK

Port 1 PVID 1

For VLAN 20 port 1 tag ports 2 and 3 untag with PVID 20

For VLAN 30 port 1 tag ports 5,6,7 and 8 untag with PVID 30

Zyxel_Melen

If one of ports 2, 3, 5, 6, 7, and 8 is not connected with a client but a VLAN-aware network device, you should set tag for the related VLAN.

mike_bt

https://community.zyxel.com/en/discussion/comment/68356#Comment_68356

Hello,

For VLAN 20, I have to untag ports 2 and 3 and tag port 1?

For VLAN 30, I have to untag ports 5, 6, 7 and 8 and tag port 1?

Is that what you mean?

PeterUK

yes and set the

PVID to 20 on ports 2 and 3

PVID to 30 on ports 5, 6, 7 and 8 

you should set for VLAN 20 for ports 5, 6, 7 and 8 excluded/forbidden

and set for VLAN 30 for ports 2 and 3 excluded/forbidden