Zyxel USG110 access VLAN Config
I have a Zyxel USG110 and an HP 1810 managed switch. I want to create two VLANs on port 5 of the Zyxel, which is directly connected to the HP managed switch. I intend to set up the two VLANs as access VLANs on the HP switch with the following configuration:
- Port 1 in WAN
- Ports 2 and 3 in VLAN 20
- Ports 5, 6, 7, and 8 in VLAN 30
In the HP 1810 switch, should I configure the ports as tagged, untagged, or excluded?
Thank you for your assistance!
All Replies
-
Port 1 PVID 1
For VLAN 20 port 1 tag ports 2 and 3 untag with PVID 20
For VLAN 30 port 1 tag ports 5,6,7 and 8 untag with PVID 30
0 -
-
Hello,
For VLAN 20, I have to untag ports 2 and 3 and tag port 1?
For VLAN 30, I have to untag ports 5, 6, 7 and 8 and tag port 1?
Is that what you mean?
0 -
yes and set the
PVID to 20 on ports 2 and 3
PVID to 30 on ports 5, 6, 7 and 8
you should set for VLAN 20 for ports 5, 6, 7 and 8 excluded/forbidden
and set for VLAN 30 for ports 2 and 3 excluded/forbidden
0
Categories
- All Categories
- 414 Beta Program
- 2.3K Nebula
- 132 Nebula Ideas
- 92 Nebula Status and Incidents
- 5.4K Security
- 181 USG FLEX H Series
- 258 Security Ideas
- 1.4K Switch
- 71 Switch Ideas
- 1K Wireless
- 37 Wireless Ideas
- 6.2K Consumer Product
- 236 Service & License
- 372 News and Release
- 79 Security Advisories
- 24 Education Center
- 5 [Campaign] Zyxel Network Detective
- 2.9K FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 80 About Community
- 69 Security Highlight