Speed issues

saltet

Hi.

I have a Zyxel mobile router 5101 with a 5 G card which is connected to a mesh network based on three nwa130 BE

When measuring download speed I get good figures from the router. The root ap are located just besides the router.

When sitting only a few meters from both I get very different downspeed between the router and the root ap. See measured figures.

My account is tomas.salzmann@telia.com

Organisation Blåsbogatan

Why do I have such different speed between the router and the ap.

Can I adjust my mesh network to get the same speed out of my ap as from the router.

Zyxel_Kay

Hi @saltet

There are several factors that can affect your speed test results, such as signal interference, bandwidth distribution, the connected radio band, and differences in radio configuration. To accurately compare the speed between your mobile router and access point, the best approach is to test in a controlled environment with only one client connected to the network.

To optimize your AP performance, you might find the following guides helpful:

1. How to Optimize Wi-Fi Connectivity with Nebula AP? — Zyxel Community

Additionally, here are a few tips that could improve your setup:

• Check AP Configuration: Ensure your AP is using the optimal channels and bandwidth settings.
  • How to Solve Co-channel Interference by DCS? — Zyxel Community
  • Selecting the Right Channel Width (20/40/80 MHz) for Your Wireless Network — Zyxel Community
• AP Positioning: Consider the placement of your AP and minimize potential sources of interference.
  • Common Causes of WiFi Interference — Zyxel Community

Zyxel_Kay

Hi @saltet

There are several factors that can affect your speed test results, such as signal interference, bandwidth distribution, the connected radio band, and differences in radio configuration. To accurately compare the speed between your mobile router and access point, the best approach is to test in a controlled environment with only one client connected to the network.

To optimize your AP performance, you might find the following guides helpful:

1. How to Optimize Wi-Fi Connectivity with Nebula AP? — Zyxel Community

Additionally, here are a few tips that could improve your setup:

• Check AP Configuration: Ensure your AP is using the optimal channels and bandwidth settings.
  • How to Solve Co-channel Interference by DCS? — Zyxel Community
  • Selecting the Right Channel Width (20/40/80 MHz) for Your Wireless Network — Zyxel Community
• AP Positioning: Consider the placement of your AP and minimize potential sources of interference.
  • Common Causes of WiFi Interference — Zyxel Community

saltet

Thanks a lot for the articles.
I changed the bandwidth and it helped.