Home Pod Mini fails setup -7005 error


I recently switched Internet provider to Brightspeed Fiber and they installed Zyxel Model Name C3510XZ-B1 Firmware Version CZX001-5.02.001.60. All my devices reconnected except my Apple Home Pod Mini. I can see via interface it connects to the router and I get the IP/Mac address. But then some setting seems to be blocking the Home Pod to finish setup.
While not an expert here, I have quite a bit of basic knowledge setting up routers and have tried all the basic (and then some) fixes such as resetting router, Home Pod, etc.
Initially I thought it was the Home Pod, but I am quite convinced it is not as it will work on my old router. These are the router logs below. Something there hopefully points to what I need to change to get this o communicate.
Thanks
1 | Feb 13 02:38:44 | kern | warning | kernel | kernel: dhd_prot_ioctl: status ret value is -5 cmd=263 |
---|---|---|---|---|---|
2 | Feb 13 02:38:21 | kern | warning | kernel | kernel: dhd_prot_ioctl: status ret value is -5 cmd=263 |
3 | Feb 13 02:37:46 | kern | warning | kernel | kernel: dhd_prot_ioctl: status ret value is -5 cmd=263 |
4 | Feb 13 02:37:32 | kern | warning | kernel | kernel: dhd_prot_ioctl: status ret value is -5 cmd=263 |
5 | Feb 13 02:33:14 | kern | warning | kernel | kernel: random key value: 0F122198E0192EB91B460176AB8D7CBFB5B0B42ACD4D0EDC400798B56E4E1F0C |
6 | Feb 13 02:33:10 | daemon | debug | dhcpd | dnsmasq-dhcp: sendLeaseMessageToESMD esmd ret=1 |
7 | Feb 13 02:33:10 | daemon | debug | dhcpd | dnsmasq-dhcp: sendLeaseMessageToESMD send to esmd buf = {\"ac\":\"add\",\"expire\":\"235433\",\"mac\":\"40:ed:cf:51:d9:86\",\"ip\":\"192.168.0.5\",\"host\":\"HomePod\",\"vendor\":\"*\",\"moui\":\"*\",\"serial\":\"*\",\"pclass\":\"*\",\"cid\":\"01:40:ed:cf:51:d9:86\",\"ifname\":\"br0\"} |
8 | Feb 13 02:33:10 | daemon | info | dhcpd | dnsmasq-dhcp: sendLeaseMessageToESMD |
kernel: dhd_flow_rings_delete_for_peer: ifindex 0 | |||||
2 | Feb 13 03:18:33 | kern | warning | kernel | kernel: dhd_flow_rings_delete_for_peer: ifindex 0 |
3 | Feb 13 03:17:05 | kern | info | kernel | kernel: GET STA INFO failed, -21 |
4 | Feb 13 03:14:10 | daemon | debug | dhcpd | dnsmasq-dhcp: sendLeaseMessageToESMD esmd ret=1 |
5 | Feb 13 03:14:10 | daemon | debug | dhcpd | dnsmasq-dhcp: sendLeaseMessageToESMD send to esmd buf = {\"ac\":\"add\",\"expire\":\"237893\",\"mac\":\"40:ed:cf:51:d9:86\",\"ip\":\"192.168.0.5\",\"host\":\"HomePod\",\"vendor\":\"*\",\"moui\":\"*\",\"serial\":\"*\",\"pclass\":\"*\",\"cid\":\"01:40:ed:cf:51:d9:86\",\"ifname\":\"br0\"} |
6 | Feb 13 03:14:10 | daemon | info | dhcpd | dnsmasq-dhcp: sendLeaseMessageToESMD |
Categories
- All Categories
- 417 Beta Program
- 2.5K Nebula
- 160 Nebula Ideas
- 108 Nebula Status and Incidents
- 5.9K Security
- 331 USG FLEX H Series
- 286 Security Ideas
- 1.5K Switch
- 78 Switch Ideas
- 1.2K Wireless
- 42 Wireless Ideas
- 6.6K Consumer Product
- 259 Service & License
- 402 News and Release
- 86 Security Advisories
- 31 Education Center
- 10 [Campaign] Zyxel Network Detective
- 3.8K FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 85 About Community
- 80 Security Highlight