Wireless clients do not get a DHCP address from the 700H
jef
Posts: 63 
Ally Member
Ally Member
What do I have wrong?
When I have the SSID vlan for "TRIB" set to vlan-12, then my wireless clients do not get a DHCP address from the zywall. The wireless clients will time out waiting for an address.
After I changed my SSID "TRIB" to vlan 1, then wireless clients started getting vLan12 addresses.
Why would the zywall not provide vlan12 dhcp address when I had the TRIB ssid set to 12, but setting it to vlan 1 does do dhcp?
Last. What is "eth104" It is the port of the SFP.
Shouldn't "TRIB" below be on vlan 12?
And if I set it to 12, then dhcp fails.
Set to 1, I get both AP pick up a dhcp and the one "c" client.
And wifi client "L" drops onto the 12 vlan.. yet the ssid is set to 1?
What is "general"?
When I have the SSID vlan for "TRIB" set to vlan-12, then my wireless clients do not get a DHCP address from the zywall. The wireless clients will time out waiting for an address.
After I changed my SSID "TRIB" to vlan 1, then wireless clients started getting vLan12 addresses.
Why would the zywall not provide vlan12 dhcp address when I had the TRIB ssid set to 12, but setting it to vlan 1 does do dhcp?
Last. What is "eth104" It is the port of the SFP.
Shouldn't "TRIB" below be on vlan 12?
And if I set it to 12, then dhcp fails.
Set to 1, I get both AP pick up a dhcp and the one "c" client.
And wifi client "L" drops onto the 12 vlan.. yet the ssid is set to 1?
What is "general"?
0
Categories
- All Categories
- 434 Beta Program
- 2.6K Nebula
- 172 Nebula Ideas
- 117 Nebula Status and Incidents
- 6.1K Security
- 404 USG FLEX H Series
- 296 Security Ideas
- 1.5K Switch
- 78 Switch Ideas
- 1.2K Wireless
- 43 Wireless Ideas
- 6.7K Consumer Product
- 267 Service & License
- 412 News and Release
- 87 Security Advisories
- 31 Education Center
- 10 [Campaign] Zyxel Network Detective
- 4K FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 85 About Community
- 83 Security Highlight
