ip address zyxewl usg 40

damianodec
damianodec Posts: 42  Freshman Member
edited April 14 in Security

hi, on my zyxel there is a label with ip address (wrote in the first configuration) 192.168.10.254 but when I try to connect it by browser I do not get login screen but error link...

how can I to get right IP address ? have I to reset it ?

thank you

All Replies

  • damianodec
    damianodec Posts: 42  Freshman Member

    by IP scanner I see IP 192.168.10.254 but ping it and not reply

  • Zyxel_Emily
    Zyxel_Emily Posts: 745  Zyxel Employee

    Hi @damianodec,

    Connect console to USG40 and use the following commands to check the status.

    1. Check the IP address of each interface

    Router> show interface all

    2. Check the physical port of a certain interface

    Router> show interface <interface name>

    3. Check the port of HTTPS and from which zone the administrator can use HTTPS to access the web GUI.

    Router> show ip http server secure status

    4. List all firewall rules and check if the access from a specific interface to ZyWALL for HTTPS is allowed or denied.

    Router> show firewall any any


  • damianodec
    damianodec Posts: 42  Freshman Member

    hi @Zyxel_Emily

    thank you, I'm try to connect usg 40 and COM1 by connect cable and Putty software:

    Serial port, COM1, 115200, OPEN

    but windows of connection give me just a green cursor on the top/left corner and nothing "welcome connections"...

    any help?

  • Zyxel_Emily
    Zyxel_Emily Posts: 745  Zyxel Employee

    Hi @damianodec,

    Try to use the Tera Term and you can select the correct COM port from the list.

  • damianodec
    damianodec Posts: 42  Freshman Member

    hi @Zyxel_Emily

    I had to reset firewall

    thank you.

Sign In to comment.

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click on this button!