IPSec VPN subnet Lan1 is not reachable
Options
Freshman Member
i have two IPSec Connection - same gateway.
Both connections are absolut identical, only the local network (Subnet) is ...
- lan1-Subnet (192.168.10.0/24)
- vlan10-Subnet, based on lan1 (192.168.200.0/24)
If i connect to 2. Connection, everything is fine - can reach each device on vlan 10
Connecting to 1. connection, i can only reach the router itself, but no device on lan1.
0
Accepted Solution
-
sorry, i have found the solution in my configuration.
the destination IPs (TPLink-Switches) are only reachable for admin, when source-ip is in VLAN1.
0
All Replies
-
sorry, i have found the solution in my configuration.
the destination IPs (TPLink-Switches) are only reachable for admin, when source-ip is in VLAN1.
0
Categories
- All Categories
- 442 Beta Program
- 2.9K Nebula
- 219 Nebula Ideas
- 128 Nebula Status and Incidents
- 6.5K Security
- 603 USG FLEX H Series
- 344 Security Ideas
- 1.7K Switch
- 84 Switch Ideas
- 1.4K Wireless
- 52 Wireless Ideas
- 7K Consumer Product
- 298 Service & License
- 481 News and Release
- 92 Security Advisories
- 31 Education Center
- 10 [Campaign] Zyxel Network Detective
- 4.8K FAQ
- 34 Documents
- 87 About Community
- 105 Security Highlight
