Virtual firewall link to USG/Zywall/VPN
Had this idea for some time but didn't think it could work for devices going by a bridge until I worked out how that could be done.
So let start with the setup LAN1 to OPT with no LAN1toOPT firewall rule but has LAN1toZyWALL allowed only.
So heres the idea a software firewall by Zyxel on windows 10 that links to the USG/Zywall/VPN device on a custom protocol (not TCP or UDP) when you start a APP like Microsoft Edge you get a prompt do you want to allow this with a user name password set by USG/Zywall/VPN (admin not allowed user type must be user) and you can click to deny, always allow or ask each time the software firewall then sends to the USG/Zywall/VPN to allow/deny the traffic for protocol, IP and port (destination and source).
The software firewall has the option to set the IP of the USG/Zywall/VPN to override default gateway IP and interface (DMZ) traffic will be sent on and seen by USG/Zywall/VPN like a bridge DMZ to WAN1.
Comments
-
I thought I do a ruff out line of how this works
https://us.v-cdn.net/6029482/uploads/editor/sb/vbtmaj6fahvt.png
0
Categories
- All Categories
- 414 Beta Program
- 2.2K Nebula
- 130 Nebula Ideas
- 91 Nebula Status and Incidents
- 5.4K Security
- 175 USG FLEX H Series
- 256 Security Ideas
- 1.4K Switch
- 71 Switch Ideas
- 1K Wireless
- 36 Wireless Ideas
- 6.2K Consumer Product
- 235 Service & License
- 372 News and Release
- 79 Security Advisories
- 24 Education Center
- 5 [Campaign] Zyxel Network Detective
- 2.9K FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 81 About Community
- 69 Security Highlight