Switch GS2210 Series - V4.50 Patch 2 Firmware Release

Zyxel_Adam

Zyxel Switch GS2210 Series
Release Note
December, 2020

Firmware Version on all models

(Click Hyper link to download the firmware directly)

Zyxel GS2210-8　　　　- V4.50(AASP.2)

Zyxel GS2210-8HP　　  - V4.50(AASQ.2)

Zyxel GS2210-24　　　 - V4.50(AAND.2)

Zyxel GS2210-24HP　　- V4.50(AANE.2)

Zyxel GS2210-24LP　　- V4.50(ABEO.2)

Zyxel GS2210-48　　　 - V4.50(AAHV.2)

Zyxel GS2210-48HP　　- V4.50(AAHW.2)

New Feature and Enhancements

CLD=Cloud mode, STK=Stacking mode, STD=Standalone mode

No.	New Feature and Enhancements	CLD	STK	STD
1.	VLAN mapping			V
2.	DHCP Auto configuration			V
3.	CLV Command			V
4.	NTP Server supports DNS format			V
5.	Enhanced dual image resilience			V
6.	SHA2			V
7.	Loop guard enhancement			V
8.	Show IPv6 socket			V
9.	Logout all current user access after changing the device management IP			V
10.	Display port utilization			V
11.	Use [Ctrl+C] to escape when executing “show running config, show log”			V
12.	Time sync (NTP) over IPv6			V
13.	Cable diagnostic MIB			V
14.	Syslog setup for IPv6 and UDP port			V
15.	ZDP v1.8.3			V
16.	Time stamp for save configuration			V
17.	POE default mode change to consumption mode, and the default config will show consumption mode setting.(POE model only)			V
18.	Web login warning page			V
19.	802.1x EAPOL flooding			V
20.	IGMP snooping leave-proxy			V
21.	Custom Default configuration			V
22.	Smart fan (designed to automatically adjust speed based on device temperature)			V
23.	Improve the bandwidth control accuracy under lower rate, especially for ISP application			V
24.	Enhanced GUI with new Zyxel logo			V
25.	Avoid multicast group cannot be added while mac collision happens			V

Bug fix

 

No.	Bug fix	CLD	STK	STD
1.	[eITS#151100702] When switch enable ARP inspection and DHCP snooping, it will cause DHCP packets be flooded to other ports.			V
2.	[eITS#151200455/ 170200710] particular Cisco IP phone may release IP (DHCP mode) after every 180 seconds.			V
3.	[eITS#151201303] SNMP GETBULK produces incorrect results when max-repetition is set greater than 55.			V
4.	[eITS#160101145] The switch cannot flood the EAPOL packets when 802.1x is disabled.			V
5.	[eITS#160200247] Displayed port speed value is triple the actual speed for both TX and RX.			V
6.	[eITS#160300698] Partial configuration loss occurs after configuring private VLAN via web GUI and rebooting switch.			V
7.	[eITS#160501171] Switch cannot forward IGMP query when using MSTP.			V
8.	[eITS#161000919] Web GUI session does not timeout properly if user does not close the browser.			V
9.	[eITS#170100698] The switch cannot auto adjust RSTP path cost according to the port speed.			V
10.	[eITS#170300428] Switch has high ping latency periodically due to the routine runtime task.			V
11.	[eITS#170400423] No longer boot up after firmware uploaded. (Only for GS2210-24LP)			V
12.	[eITS#170500473] Prevent unexpected reboot caused by Avast antivirus software.			V
13.	[eITS#170500522] The switch may reboot unexpectedly after changing the current settings of classifiers.			V
14.	[eITS#170500863] Switch may encounter unexpectedly reboot under a large IP network environment.			V
15.	[eITS#170600557] Floods an IGMP query every time when switch receives an IGMP Leave.			V
16.	[eITS#170801018] Sometimes SNMP agent returns incorrect gateway MAC address.			V
17.	[eITS#170900439] Switch does not provide PoE power when the time range is very closed to NTP synctime.			V
18.	[eITS#171000095] The SNMP ifHCInOctets/IfHCOutOctets(counter 64) cannot count exceed 2^32.			V
19.	[eITS#171000116] Operator cannot modify the syslog server level via SNMP while Syslog server is activated.			V
20.	[eITS#171200272] Client traffic is unexpectedly discarded after MAC address aging time when IPSG and port security are enabled.			V
21.	[eITS#180100999] Switch may miss configuration if upgrades to new firmware.			V
22.	[eITS#180200048] Web GUI may display Syntax error when restoring configuration.			V
23.	Enhance the UX with MacBook by changing the ASCII of the backspace to follow the industrial standard.			V
24.	Switch can’t be managed via WEB/CLI smoothly when there are a lot of broadcast/multicast traffics in the network environment.			V

Please refer to the Download Link for more details.

Mike_Mike

This link does not work anymore. Why would ever somebody do that?
please provide the link for the GS-2210 series. Thank you.
we can't recover lsot password without those roms... 

Zyxel_CSO

Hi @Mike_Mike,

The "Download link" is to redirect user to a GS2210 release note.
If you would like to download the .rom file, please download the file on the top of this page.

Thanks,