USG 110 - SSL VPN - NO Extension network
Hi All,
i have a problem with USG 110 with firmware 4.35
I have setup a VPN connection and enable Extension network but i can't explore my local network (ping and tracert not works too). I have add my Lan in network list and when i connect with SecuExtender i can see my subnet (192.168.2.0/24) in Routes
I think there is a problem in Security Policy because if i disable it (uncheck Enable Policy Control) i can explore my local network and ping too
I try to delete and re-create SSL VPN policy but don't solve my problem
Thanks so much
Roberto
Comments
-
You could check the Zone setting of your SSL VPN policy.
Then, check if the security policy is allow the VPN Zone to your local network.
0 -
Hi Ian,
thanks for reply
I have these settings
Have you some idea?
Thanks very much!
Roberto
0 -
Hi Roberto,
we've got the following incomming firewall rule in place for our SSL VPN, where we have full access to our Company LAN:
0 -
-
Hi all,
for you information
I reboot the firewall with old- Firmware ver. V4.35(AAAA.0) and now it'works again...
0
Categories
- All Categories
- 398 Beta Program
- 2.1K Nebula
- 117 Nebula Ideas
- 83 Nebula Status and Incidents
- 5.2K Security
- 99 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 69 Switch Ideas
- 923 WirelessLAN
- 35 WLAN Ideas
- 5.9K Consumer Product
- 212 Service & License
- 337 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 2.1K FAQ
- 1K Nebula FAQ
- 445 Security FAQ
- 238 Switch FAQ
- 213 WirelessLAN FAQ
- 47 Consumer Product FAQ
- 142 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 72 About Community
- 62 Security Highlight