NXC2500: facing an issue for updating firmware NXC2500_5.40(AAIG.2)C0

Options
Gururaj
Gururaj Posts: 2 image  Freshman Member
First Comment
edited May 2024 in Wireless

We are using NXC2500. Current firmware version is V5.40(AAIG.0). Facing issue while updating firmware to NXC2500_5.40(AAIG.2)C0. Getting error can't update.

Also we are facing intermittant error as "AP Disconnect, idle in RUN state" Also all APs disconnecting frequently..

Please help how to resolve

All Replies

  • Zyxel_Joslyn
    Zyxel_Joslyn Posts: 360 image  Zyxel Employee
    25 Answers First Comment Friend Collector Fourth Anniversary
    edited January 2020

    Hi @Gururaj

    I tried to upgrading NXC2500 firmware from V5.40(AAIG.0) to 5.40(AAIG.2)C0; however, I did not see the symptom as yours. Could you provide me the error message or screenshot? It will help us to realize the issue.

    About the AP disconnect, did they all connect to the same switch or other devices? If yes, could you help to confirm the physical connection status? Because it is abnormal all APs disconnected at the same time.

    Thanks.

    Joslyn

  • Gururaj
    Gururaj Posts: 2 image  Freshman Member
    First Comment

    Joslyn,

    thanks for your reply..will collect the exact error screenshot & update you.

    For AP restart issue, all these APs are connected to different smart switches, in a VLAN environment..

    Its also observed that NXC2500 get disconnected from network at that time

  • Zyxel_Joslyn
    Zyxel_Joslyn Posts: 360 image  Zyxel Employee
    25 Answers First Comment Friend Collector Fourth Anniversary

    Hi @Gururaj

    Thanks for your information. Wait for your update. :)

    By the way, if the firmware upgrading was failed via the Web GUI, would you try to update it via the ftp? Use FTP to connect to the NXC2500, and key in the credential. Change the type as "bin", then "put" the firmware path.

    3.png

    Hope it helps.

    Joslyn

Categories

Wireless Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）