vpn client and nat server

antonellobellisario
antonellobellisario Posts: 17  Freshman Member
First Comment Third Anniversary
edited April 2021 in Security 
hello, i have a problem that i can't configure usg40 for smart home working.

I have a usg40 with public ip which is connected to a DNS server (2 internal network cards) wan side 192.168.250.xx, and the clients nested in lan 192.168.200.xx.
I would like to join domain with home pc then open vpn and get the same ip address released

I state that I tried to do a similar configuration with a DNS server that was not nattava and joined domain quietly.
am I wrong something on nat server ??


Best Answers

  • Zyxel_Jerry
    Zyxel_Jerry Posts: 1,283  Zyxel Employee
    Zyxel Certified Network Administrator - Security Zyxel Certified Sales Associate 50 Answers 1000 Comments
    Answer ✓

    Hi @antonellobellisario

    Welcome to Zyxel community

    Is this your topology below?

    IPSec VPN client need to join the AD domain and get the IP address the same as subnet 192.168.200.X?

    topology new.png


    Untitled Image

    Share your feedback through our survey, make your voice heard, and win a WiFi 7 AP!
    https://bit.ly/2024_Survey_Community

  • Zyxel_Jerry
    Zyxel_Jerry Posts: 1,283  Zyxel Employee
    Zyxel Certified Network Administrator - Security Zyxel Certified Sales Associate 50 Answers 1000 Comments
    Answer ✓

    Hi @antonellobellisario ,

    If in the AD server, each USER is divided into groups,

    Then on USG settings, it just need to add one ext-group users into the rule.

    For example:

    There are three Sites group: HQ,Branch1 and Branch2, these sites belongs to the "Company" group,

    There are five users under each sites (HQ-Jack,Tom; Branch1- John, Marry; Branch2- Jessica)

    In this scenario, we only have to add one ext-group user on USG, that is the group "Company"

    If there is no "Company"group, then it need to add three ext-group user in this scenario,

    it need to add HQ group, Branch1 group and Branch2 group.

    If there is no "Company" and the "Sites" group, then it need to add five ext-group user.

    To make more easy setting on USG, it need to have a nice organize user into group on AD server.

    Untitled Image

    Share your feedback through our survey, make your voice heard, and win a WiFi 7 AP!
    https://bit.ly/2024_Survey_Community

  • Zyxel_Jerry
    Zyxel_Jerry Posts: 1,283  Zyxel Employee
    Zyxel Certified Network Administrator - Security Zyxel Certified Sales Associate 50 Answers 1000 Comments
    Answer ✓

    Hi @antonellobellisario

    Those question/problems users shared here are valuable to us. And the experience sharing also can help other people when deploying their devices. Even sometimes you can get experienced feedback from different field experts. So we can just leave our discussions in the forum thread.

    If you have any personal information to share with us, feel free to share the information in private message directly.

    Untitled Image

    Share your feedback through our survey, make your voice heard, and win a WiFi 7 AP!
    https://bit.ly/2024_Survey_Community

«1

All Replies

  • Zyxel_Jerry
    Zyxel_Jerry Posts: 1,283  Zyxel Employee
    Zyxel Certified Network Administrator - Security Zyxel Certified Sales Associate 50 Answers 1000 Comments
    Answer ✓

    Hi @antonellobellisario

    Welcome to Zyxel community

    Is this your topology below?

    IPSec VPN client need to join the AD domain and get the IP address the same as subnet 192.168.200.X?

    topology new.png


    Untitled Image

    Share your feedback through our survey, make your voice heard, and win a WiFi 7 AP!
    https://bit.ly/2024_Survey_Community

  • antonellobellisario
    antonellobellisario Posts: 17  Freshman Member
    First Comment Third Anniversary

    yes this is the typology ...

    but how can I configure it ??


    thanks

  • antonellobellisario
    antonellobellisario Posts: 17  Freshman Member
    First Comment Third Anniversary

    I managed to create the Ipsec vpn tunnel but I only reach the server on the wan side and I don't see the clients on the network and therefore I can't log in domain

  • Zyxel_Jerry
    Zyxel_Jerry Posts: 1,283  Zyxel Employee
    Zyxel Certified Network Administrator - Security Zyxel Certified Sales Associate 50 Answers 1000 Comments

    Hi @antonellobellisario

    You can try with L2TP over IPSec tunnel for certain purpose.

    Here is user guide how to setup L2TP VPN

    https://businessforum.zyxel.com/discussion/618/how-to-use-the-vpn-setup-wizard-to-create-a-l2tp-vpn-on-the-zywall-usg

    Here is FAQ of how to configure AD User do the authentication on L2TP scenario

    https://kb.zyxel.com/KB/searchArticle!gwsViewDetail.action?articleOid=013417&lang=EN

    Untitled Image

    Share your feedback through our survey, make your voice heard, and win a WiFi 7 AP!
    https://bit.ly/2024_Survey_Community

  • antonellobellisario
    antonellobellisario Posts: 17  Freshman Member
    First Comment Third Anniversary 
    is there another way to join the domain without configuring the AD user?
to make things easier
maybe even changing the server configuration behind the zyxel


  • Zyxel_Jerry
    Zyxel_Jerry Posts: 1,283  Zyxel Employee
    Zyxel Certified Network Administrator - Security Zyxel Certified Sales Associate 50 Answers 1000 Comments
    Answer ✓

    Hi @antonellobellisario ,

    If in the AD server, each USER is divided into groups,

    Then on USG settings, it just need to add one ext-group users into the rule.

    For example:

    There are three Sites group: HQ,Branch1 and Branch2, these sites belongs to the "Company" group,

    There are five users under each sites (HQ-Jack,Tom; Branch1- John, Marry; Branch2- Jessica)

    In this scenario, we only have to add one ext-group user on USG, that is the group "Company"

    If there is no "Company"group, then it need to add three ext-group user in this scenario,

    it need to add HQ group, Branch1 group and Branch2 group.

    If there is no "Company" and the "Sites" group, then it need to add five ext-group user.

    To make more easy setting on USG, it need to have a nice organize user into group on AD server.

    Untitled Image

    Share your feedback through our survey, make your voice heard, and win a WiFi 7 AP!
    https://bit.ly/2024_Survey_Community

  • antonellobellisario
    antonellobellisario Posts: 17  Freshman Member
    First Comment Third Anniversary 
    OK! I got it
I have it in Ad Server "bellisario" domain
with an "utenti di segreteria" group and all users in that group.

In this scenario, i must to add one ext-group user on USG, that is the group "utenti di segreteria" 

is  it correct?




  • antonellobellisario
    antonellobellisario Posts: 17  Freshman Member
    First Comment Third Anniversary
    edited May 2020

    i can't make vpn connection with server :(

  • Zyxel_Jerry
    Zyxel_Jerry Posts: 1,283  Zyxel Employee
    Zyxel Certified Network Administrator - Security Zyxel Certified Sales Associate 50 Answers 1000 Comments
    Answer ✓

    Hi @antonellobellisario

    Those question/problems users shared here are valuable to us. And the experience sharing also can help other people when deploying their devices. Even sometimes you can get experienced feedback from different field experts. So we can just leave our discussions in the forum thread.

    If you have any personal information to share with us, feel free to share the information in private message directly.

    Untitled Image

    Share your feedback through our survey, make your voice heard, and win a WiFi 7 AP!
    https://bit.ly/2024_Survey_Community

Categories

Security Highlight


Read more

Security Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）