log in remote access

antonellobellisario · March 2020

I can't get into remote access (https) on my USG40 it's as if my ip address was entered in a black list.

with other ip stations I can enter safely

Zyxel_Jerry · March 2020

Can you try to access device via https with this ip 93.36.177.31 and check on the log?

Here is the step to check the log on the device?

Go to Monitor > Log > View Log to have check if there is any rule blocked the ip address ?

antonellobellisario · March 2020

hi

with this ip address i can' t access (93.36.177.31)

with any other ip address I can.

antonellobellisario · March 2020

but there is no rule that blocks my ip

Zyxel_Jerry · March 2020

Can you try to collect packet on WAN interface to check if there is any IP related to(93.36.177.31)?

Here is the step to collect the packet on Wan interface

Go to Maintenance > Diagnostics > Packet Capture > Capture > Select WAN interface and click Capture

After capture the packet, go to Maintenance > Diagnostics > Packet Capture > Files > Select wan interface file and click Download.

antonellobellisario · March 2020

can I attach the file here?
because it gives me no result with 93.36.177.31

Zyxel_Jerry · April 2020

It looks like it was not the issue on USG40.

Can you draw your topology with IP address?

Is there any router in front of USG40?

antonellobellisario · April 2020

if I install a VPN software on my PC to mask the IP address I can reach the us

Zyxel_Jerry · April 2020

Can you SSH to access the device and type the command below and try to use IP 93.37.177.31 to access web gui and check the result?

If there is no packet show on the result, it means the traffic cannot reach our device,

Or there is nat routing transfer the IP 93.37.177.31.

All Replies