Zyxel USG 60 W throughput

Options
Dovetail_MD
Dovetail_MD Posts: 81 image  Ally Member
First Comment Second Anniversary
edited April 2021 in Security
Good afternoon all,

We are wondering why we getting a slow speed on in our network.

The incoming supply is running at about 160 MBPS is measured by plugging a laptop straight into the incoming router i.e. on the outside of the DMZ whereas on a workstation we are getting about 60 MBPS.

The switches between the USG 60 W and our office are both running at gigabit and the wiring interconnects are a mixture of fibre and CAT7

Any thoughts team?
«1

All Replies

  • Zyxel_Cooldia
    Zyxel_Cooldia Posts: 1,568 image  Zyxel Employee
    Zyxel Certified Network Administrator - Security Zyxel Certified Sales Associate 100 Answers 1000 Comments
    With UTM feature enabled, traffics are thoroughly scanned by USG, it would have effect on performance.
  • Dovetail_MD
    Dovetail_MD Posts: 81 image  Ally Member
    First Comment Second Anniversary
    Good morning

    Thank you for your reply

    Really as much of a hit to knock the speed down by 50%?
  • Zyxel_Cooldia
    Zyxel_Cooldia Posts: 1,568 image  Zyxel Employee
    Zyxel Certified Network Administrator - Security Zyxel Certified Sales Associate 100 Answers 1000 Comments
    Hi @Dovetail_MD,
    It is possible when all UTM features are enabled.
  • Zyxel_Cooldia
    Zyxel_Cooldia Posts: 1,568 image  Zyxel Employee
    Zyxel Certified Network Administrator - Security Zyxel Certified Sales Associate 100 Answers 1000 Comments
    For better performance with UTM enabled, ATP-100W would be suitable for your site.

  • Dovetail_MD
    Dovetail_MD Posts: 81 image  Ally Member
    First Comment Second Anniversary
    Good morning

    Thank you - I guess we could use a simple firewall rather than one with modem facilities as we have a modem from our broadband supplier which does simple NAT

    But does this simplification really improve throughput?

    Best wishes

    Andy
  • Zyxel_Cooldia
    Zyxel_Cooldia Posts: 1,568 image  Zyxel Employee
    Zyxel Certified Network Administrator - Security Zyxel Certified Sales Associate 100 Answers 1000 Comments
    Hi @Dovetail_MD,

    The throughput will be higher  if it just runs as a pure NAT router without UTM services. However, your network will lose the protection from USG instead. It depends on what purpose you want to achieve in your network environment.


  • Dovetail_MD
    Dovetail_MD Posts: 81 image  Ally Member
    First Comment Second Anniversary
    You misunderstand

    The vendor's router does NAT - I'm asking if no NAT and perhaps no wifi on the ZYXEL inboard of that will help speed
  • Dovetail_MD
    Dovetail_MD Posts: 81 image  Ally Member
    First Comment Second Anniversary
    And perhaps if Zyxels had more processor grunt the hit of UTM would be less?
  • PeterUK
    PeterUK Posts: 4,264 image  Guru Member
    250 Answers 2500 Comments Friend Collector Eighth Anniversary
    By default this is on and limits your speed so try this
     https://businessforum.zyxel.com/discussion/4494/tip-for-getting-faster-throughput-on-usg-vpn-zywall
  • Zyxel_Cooldia
    Zyxel_Cooldia Posts: 1,568 image  Zyxel Employee
    Zyxel Certified Network Administrator - Security Zyxel Certified Sales Associate 100 Answers 1000 Comments
    @PeterUK, True, It will have performance improvement if we uncheck collect statistics. 
    @Dovetail_MD, UTM service is the most CPU power consuming application, even though if you only enabled the UTM function without NAT, the improvement will still be limited

Categories

Security Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）