IPsec VPN problem
Hi guys,
Just a quick question. We have one VPN gateway used by 2 phases 2 on a USG40W as we have on many other router without any problem.
On this one, for an unknown reason, phase 2 are never connected both at the same time, there are dropping all the time, sometime we can ping through these phase 2 but it is very unstable.
I tried with firewall off and it's still the same.
In the debbug logs, I notice some weird error regarding IPSec, why would IPSec drop packet ?
Thanks for help,
Davy
IPSec Dropping packet. ret=1, step=11 IPSecSPI: 0x0 (0) SEQ: 0x0 (0) No rule found, Dropping TCP packet. ret=1, step=11 IPSec Dropping packet. ret=1, step=11 IPSec SPI: 0x0 (0) SEQ: 0x0 (0) No rule found, Dropping UDP packet. ret=1, step=11
All Replies
-
@IT_Field_Support,
I've applied your configuration file to USG40W to run the test.
The test result is sent to you in the private message.
0 -
Hello ,
On zyxel wal usg50 getting this erroIPSec SPI: 0x0 (0) SEQ: 0x0 (0) No rule found, Dropping UDP packet. ret=1, step=11 any help? Thanks
0 -
Hi @Irfan,
What is the model of the remote site of VPN tunnel?
Could you share startup-config.conf of USG50 and topology with me in private message?
0 -
Hi,
Ok thanks , now i upgrade USG50 with latest firmware which you sent me..
Than let you know.
Thanks0
Categories
- All Categories
- 384 Beta Program
- 2.1K Nebula
- 116 Nebula Ideas
- 79 Nebula Status and Incidents
- 5.1K Security
- 70 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 70 Switch Ideas
- 907 WirelessLAN
- 34 WLAN Ideas
- 5.9K Consumer Product
- 210 Service & License
- 332 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.9K FAQ
- 885 Nebula FAQ
- 415 Security FAQ
- 228 Switch FAQ
- 198 WirelessLAN FAQ
- 46 Consumer Product FAQ
- 137 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 73 About Community
- 63 Security Highlight