How to risolve the problem with CLI error sh: ifconfig: not found

desman · March 2018

I’m using AMG1312-T10B, AMG1202-T10B, AMG1302-T11C and I want to manage them with ssh. I am able to change the password of WIFI with CLI command: wlancmd pskkey set -i 0 ***** and it works. But when I want to turn off the WiFi with command wlancmd up -i 1 it gives me the error: sh: ifconfig: not found. How can I fix it. Thanks.

Zyxel_Panda · March 2018

Hi desman,

This CLI is not supported , if you wish configure the password please do so with the GUI.

As a notice, for the AMG products we have the Home Forum "https://homeforum.zyxel.com" whereas it is more likely to find discussions and FAQs regarding this product series.
Hope this helps!

Zyxel_Panda · March 2018

Hi desman,

This CLI is not supported , if you wish configure the password please do so with the GUI.

As a notice, for the AMG products we have the Home Forum "https://homeforum.zyxel.com" whereas it is more likely to find discussions and FAQs regarding this product series.
Hope this helps!

mk2802 · December 2020

I’m using AMG1312-T10B, AMG1202-T10B, AMG1302-T11C and I want to manage them with ssh. I am able to change the vci and vpi I with CLI command for fix it. Thanks.

mk2802 · December 2020

How do I save it

Hummel · December 2020

Hi @mk2802

It is suggested to change the vci and vpi from GUI.
You can refer to the User guide for knowing how to set VCI and VPI on the GUI. Please search "Broadband" in the User Guide. Then you will be able to save the settings of VCI and VPI via GUI.

[UG of AMG1312-T10B]
ftp://ftp2.zyxel.com/AMG1312-T10B/user_guide/AMG1312-T10B_1.pdf

[UG of AMG1202-T10B]
ftp://ftp2.zyxel.com/AMG1202-T10B/user_guide/AMG1202-T10B_1.pdf

[UG of AMG1202-T10B]
ftp://ftp2.zyxel.com/AMG1302-T11C/user_guide/AMG1302-T11C_V3.00.pdf

mk2802 · December 2020

hi.
i want to change via telnet.

Hummel · December 2020

@mk2802

As I know, CLI commands are not provided for end users and they are mostly used for debugging purpose for engineers. I still suggest to set up your configurations via GUI.

How to risolve the problem with CLI error sh: ifconfig: not found

Accepted Solution

All Replies

Categories

Wireless Help Center