USG310 DNS over VPN
Accepted Solution
-
Hi @weite
4.60P1 has fixed issue which USG unable to initial DNS query via VPN tunnel.
You may upgrade firmware to 4.60P1 first.
Or you can add Static Route on your USG310.
e.g. if your local LAN IP address is 192.168.1.1 and peer IP subnet is 192.168.10.0/24.
Then you can add static route like it:
Then USG initial traffic to 192.168.10.0/24 will pass into VPN tunnel which you established.
0
All Replies
-
Hi @weite
4.60P1 has fixed issue which USG unable to initial DNS query via VPN tunnel.
You may upgrade firmware to 4.60P1 first.
Or you can add Static Route on your USG310.
e.g. if your local LAN IP address is 192.168.1.1 and peer IP subnet is 192.168.10.0/24.
Then you can add static route like it:
Then USG initial traffic to 192.168.10.0/24 will pass into VPN tunnel which you established.
0 -
Thanks for the fast answer. I installed the 4.60P1 and all is well. It can be so easy.
Many Thanks!!!
0
Categories
- All Categories
- 383 Beta Program
- 2.1K Nebula
- 116 Nebula Ideas
- 80 Nebula Status and Incidents
- 5.1K Security
- 76 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 69 Switch Ideas
- 907 WirelessLAN
- 34 WLAN Ideas
- 5.9K Consumer Product
- 209 Service & License
- 335 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.9K FAQ
- 890 Nebula FAQ
- 415 Security FAQ
- 233 Switch FAQ
- 203 WirelessLAN FAQ
- 46 Consumer Product FAQ
- 137 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 73 About Community
- 62 Security Highlight