Idea: Implement scriptable way to control POE status

bozko
bozko Posts: 3
First Comment
edited August 2022 in Switch
It will be a great addition to functionality of any POE enabled switch. 

I think most lazy to implement and in the same time very convenient way to use is to do this is via CLI interface.

e.g. 

GS1920# poe 1-3,22

will turn ON poe supply on ports 1,2,3 and 22


GS1920# no poe 3-5,12-15,19

will turn OFF poe supply on ports 3,4,5,12,13,14,15 and 19


or HP way:

# interface <list> power
turn ON

# no interface <list> power
 turn OFF

All Replies

  • Alfonso
    Alfonso Posts: 257  Master Member
    First Anniversary Friend Collector First Answer First Comment
    Good idea @bozko
  • Zyxel_Melen
    Zyxel_Melen Posts: 1,590  Zyxel Employee
    First Anniversary 10 Comments Friend Collector First Answer
    Hi @bozko,

    I would like to suggest you to use POE time range function.
    This function can let you automatically ON/OFF POE port in same time at the time you set in schedule.
    First go to Advanced Application > Time Range to setup a schedule.
    Below is the example:


    Then go to Basic setting > POE Setup > POE time range setup to set which port you want to follow the time range.
    Below is the example:



    Hope it helps.

    Zyxel Melen