VLAN between GS1900-24HP and GS1910-24
I have a GS1910-24 where i've set the default vlan 1 untagged, and a tagged VLAN id 30, i've put some access points with guest vlan on 30 (tagged), and a router with dhcp also on that vlan. On this switch all works as it should, both vlans (1 default untagged and 30 tagged) works correctly.
The config is (for all the ports):
Configuration->VLANs Port: * Port VLAN: 1 Ingress Filtering: not enabled Ingress Acceptance: Tagged and Untagged Egress Tagging: Untag Port VLAN Allowed VLANs: 1,30 Forbidden VLANs: nothing<br>
This switch is connected via SPF port 22 with a fiber link to a remote GS1900-24HP (on SPF, port 25). Also this switch need to see both the vlans, with the same config. But it not works. Seem like the vlan are not passing via the fiber link.
The config of the remote GS1900-24HP is (for all the ports):
VLAN->VLAN->VLAN VLAN ID: 1 VLAN Name: default VLAN Type: Default VLAN ID: 30 VLAN Name: GUEST0030 VLAN Type: Static VLAN->VLAN->Port All ports: PVID: 1 Accept Frame Type: ALL Ingress Check: Disable VLAN Trunk: Enable VLAN->VLAN->VLAN Port For VLAN ID 1: All ports UNTAGGED For VLAN ID 30: All ports TAGGED<br>
I've also done some test with different settings, also resetted both switches to factory defaults and reconfigured, without success.
Someone can explain me what i'm doing wrong?
Sign In to comment.