SBG3500 configuration
Hi,
i need to configure my SBG3500-NB to use wan (adsl2+) connection with 5 static/public ip address
could someone help me?
I need to assign 1 public IP to dhcp range (i.e 210.211.212.213 assigned to range192.168.1.100 - 200) and Others public IPs NAT to internal lan IPs/hosts (i.e. public IP 210.211.212.214 to 192.168.1.4; 210.211.212.215 to 192.168.1.5...etc)
Thanks in adv
i need to configure my SBG3500-NB to use wan (adsl2+) connection with 5 static/public ip address
could someone help me?
I need to assign 1 public IP to dhcp range (i.e 210.211.212.213 assigned to range192.168.1.100 - 200) and Others public IPs NAT to internal lan IPs/hosts (i.e. public IP 210.211.212.214 to 192.168.1.4; 210.211.212.215 to 192.168.1.5...etc)
Thanks in adv
0
All Replies
-
Hi @Toti,
You can add new wan interface on “Network setting > Broadband > Broadband” for multi-connection.For intranet host NAT to specific public IP, you can set up on “Network setting > Routing> Policy Forwarding”.0
Categories
- All Categories
- 347 Beta Program
- 2.1K Nebula
- 114 Nebula Ideas
- 77 Nebula Status and Incidents
- 5K Security
- 44 USG FLEX H Series
- 246 Security Ideas
- 1.2K Switch
- 65 Switch Ideas
- 901 WirelessLAN
- 33 WLAN Ideas
- 5.8K Consumer Product
- 204 Service & License
- 326 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.8K FAQ
- 831 Nebula FAQ
- 401 Security FAQ
- 219 Switch FAQ
- 190 WirelessLAN FAQ
- 45 Consumer Product FAQ
- 136 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 71 About Community
- 61 Security Highlight