UAG4100 war jahrelang über den WAN Port mit

BoardingHouse
BoardingHouse Posts: 6
in Security
Fritz Box verbunden. Damit Verbindung zum Internet und auch zum Netzwerk mit Bon-Drucker und PC für Wartung.
Seit Firmware Update und Umbau mit Neuverkabelung ist die UAG4100 über WAN
nicht mehr vom Netzwerk zu erreichen ?
Für jede Idee dankbar !

Accepted Solution

  • Zyxel_Stanley
    Zyxel_Stanley Posts: 1,379  Zyxel Employee
    100 Answers 1000 Comments Friend Collector Seventh Anniversary
    edited March 2022 Answer ✓
    Hi @BoardingHouse
    You may make sure what kind of IP connection offered by your ISP first. (DHCP ? Static IP ? PPPoE ?...etc?)
    After confirming your connection is correct, you may also make sure the WAN and LAN IP segment without overlap. (default LAN IP address are: 172.16.0.0/16 and 172.17.0.0/16 )

All Replies

  • Zyxel_Stanley
    Zyxel_Stanley Posts: 1,379  Zyxel Employee
    100 Answers 1000 Comments Friend Collector Seventh Anniversary
    edited March 2022 Answer ✓
    Hi @BoardingHouse
    You may make sure what kind of IP connection offered by your ISP first. (DHCP ? Static IP ? PPPoE ?...etc?)
    After confirming your connection is correct, you may also make sure the WAN and LAN IP segment without overlap. (default LAN IP address are: 172.16.0.0/16 and 172.17.0.0/16 )
  • BoardingHouse
    BoardingHouse Posts: 6
    thank you for your help..
    a change in policy control did the trick..
    (wan to device any instead of default..)

Categories

Security Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）