Zyxel ATP 500 stops respondig after reboot

abonadonna · March 2022

My ATP 500 stops responding after a reboot, SYS blink ever..we have latest firmware...can you help me?

PeterUK · March 2022

You may have to do a reset and load a backup config

Out of interest did you use the “schedule backup” ?as I did have trouble with the new firmware on VPN300 and loaded the lastgood.conf

Zyxel_Tobias · March 2022

Peter, Reset didn´t help! Please follow SOP:

https://support.zyxel.eu/hc/en-us/articles/4637859383698

Schedule Backup can cause it, but not on VPN Series as Application / IDP Signature must be there.

PeterUK · March 2022

For things like this to happen my idea would of helped or not in this case?

https://community.zyxel.com/en/discussion/4806/firmware-boot-toggle

BoJack · March 2022

https://community.zyxel.com/en/discussion/12943/recovery-steps-for-usg-flex-atp-series-application-patrol-signature-issue#latest

Zyxel_Kevin · March 2022

Hi @abonadonna,
Kindly find the following forum
https://community.zyxel.com/en/discussion/12943/recovery-steps-for-usg-flex-atp-series-application-patrol-signature-issue#latest
And please feel free to contact us if you need further support from us.
Thank you.
Kevin

Zyxel ATP 500 stops respondig after reboot

All Replies

Categories

Security Help Center