Standby firmware update... part 2nd
Options
Hi,
i asked info about how to update the standby firmare of my ATP 500 without the need to reboot the Firewall neither to reboot to standby firmare.
I got an answer to the post here:
https://community.zyxel.com/en/discussion/13013/standby-firmware-update#latest
I followed the steps as suggested in the post, so i updated the standby firmware from
V4.60(ABFU.0) to V5.21(ABFU.1) with no need to manually upgrade to ZLD5.10, and decide not to reboot the Firewall answering "No" to the request to reboot.
Everything seemed to work fine (you can see here that both running and standby shows v 5.21(ABFU.1) firmware
but now when i tried to update the running firmware, as i press the "folder" icon for the local firmware update i got the following warning:
Moreover i notice that the icon of the "cloud update" of the standby firmware shows a strange "circle with an arrow"
It seems like the standby firmware update is still ongoing even if i did it several days ago.
how can i solve all this? did i miss sometihng?
All i want is to upgrade the running firmware keeping the standby to 5.21(ABFU.1).
How can i proceed?
Please advice
Thanks in advance.
Filippo
i asked info about how to update the standby firmare of my ATP 500 without the need to reboot the Firewall neither to reboot to standby firmare.
I got an answer to the post here:
https://community.zyxel.com/en/discussion/13013/standby-firmware-update#latest
I followed the steps as suggested in the post, so i updated the standby firmware from
V4.60(ABFU.0) to V5.21(ABFU.1) with no need to manually upgrade to ZLD5.10, and decide not to reboot the Firewall answering "No" to the request to reboot.
Everything seemed to work fine (you can see here that both running and standby shows v 5.21(ABFU.1) firmware
but now when i tried to update the running firmware, as i press the "folder" icon for the local firmware update i got the following warning:
Moreover i notice that the icon of the "cloud update" of the standby firmware shows a strange "circle with an arrow"
It seems like the standby firmware update is still ongoing even if i did it several days ago.
how can i solve all this? did i miss sometihng?
All i want is to upgrade the running firmware keeping the standby to 5.21(ABFU.1).
How can i proceed?
Please advice
Thanks in advance.
Filippo
0
Accepted Solution
-
Hi @xkp68You can press “Yes” button to stop downloading firmware to the standby partition.Then manually update the latest 5.30 firmware to the running partition via the local folder icon and reboot your running partition. It shall be OK.0
All Replies
-
reboot
1 -
update to 5.30 as its out and reboot0
-
Hi @xkp68You can press “Yes” button to stop downloading firmware to the standby partition.Then manually update the latest 5.30 firmware to the running partition via the local folder icon and reboot your running partition. It shall be OK.0
-
Thanks for sharing, I found a lot of interesting information here. A really good post, very thankful and helpful that you will write many more posts like this one.
1
Categories
- All Categories
- 383 Beta Program
- 2.1K Nebula
- 116 Nebula Ideas
- 80 Nebula Status and Incidents
- 5.1K Security
- 76 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 69 Switch Ideas
- 907 WirelessLAN
- 34 WLAN Ideas
- 5.9K Consumer Product
- 209 Service & License
- 335 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.9K FAQ
- 890 Nebula FAQ
- 415 Security FAQ
- 233 Switch FAQ
- 203 WirelessLAN FAQ
- 46 Consumer Product FAQ
- 137 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 73 About Community
- 62 Security Highlight