GS1900-24E

Jurgen_lucca
Jurgen_lucca Posts: 2
edited August 2022 in Switch
I have set 200 Mbit bandwith limit in Ingress RateLimit but it seems not work, infact the speed rate is too variable and is set to 20 - 30 MBit, and if I try to set Egress RateLimit everything works perfectly!!

All Replies

  • Jurgen_lucca
    Jurgen_lucca Posts: 2
    edited May 2022
    Very Strange....
  • Zyxel_Chris
    Zyxel_Chris Posts: 653  Zyxel Employee
    First Anniversary 10 Comments Friend Collector First Answer
    @Jurgen_lucca,

    This is a known issue on GS1900 series for gaps on TCP traffic ingress rate limit performance.  Zyxel has made effort to improve accuracy of ingress rate limit performance on business Switch GS2220 series and above as this is more frequently used as an advanced requirement for business network.  For product positioning of GS1900 as an entry-level smart managed Switch , it carries simple network features for basic network setups.



    Chris
  • Zyxel_Chris
    Zyxel_Chris Posts: 653  Zyxel Employee
    First Anniversary 10 Comments Friend Collector First Answer
    @Jurgen_lucca,
    It's been a while not hearing from you, there is one thing I'd like to confirm with you, when you mention about "the speed rate is too variable and is set to 20 - 30 MBit" does that means the speed drops down to 30Mbps or it's like if the speed limit was 100 and you only get 70~80 Mbps?
    Chris