XGS1930-52HP Switch port reset via cli
Options
Accepted Solution
-
Hi @Tobihoby
Welcome to Zyxel community!
Since the XGS1930-52HP is a smart managed switch, it does not support CLI command.
You can use PWR cycle function to restart your PD(like CAM) via Web GUI.
Please go to Status > Neighbor and click the cycle button of the PD connecting port which you want to restart.
1. Click Neighbor
2. Click the cycle button of the PD connecting port that you want to restart. I use port 2 as an example.
Zyxel Melen
1
All Replies
-
Hi @Tobihoby
Welcome to Zyxel community!
Since the XGS1930-52HP is a smart managed switch, it does not support CLI command.
You can use PWR cycle function to restart your PD(like CAM) via Web GUI.
Please go to Status > Neighbor and click the cycle button of the PD connecting port which you want to restart.
1. Click Neighbor
2. Click the cycle button of the PD connecting port that you want to restart. I use port 2 as an example.
Zyxel Melen
1 -
Prior to the Xs1930 every time I was uploading between 2.5Gbps and 1Gbps devices I was getting around 500 Mbps. Now with the XS1930 I can get the ful1 1Gbps or https://testmyspeed.onl/.
0
Categories
- All Categories
- 384 Beta Program
- 2.1K Nebula
- 117 Nebula Ideas
- 80 Nebula Status and Incidents
- 5.1K Security
- 79 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 69 Switch Ideas
- 909 WirelessLAN
- 34 WLAN Ideas
- 5.9K Consumer Product
- 209 Service & License
- 335 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.9K FAQ
- 898 Nebula FAQ
- 415 Security FAQ
- 234 Switch FAQ
- 205 WirelessLAN FAQ
- 46 Consumer Product FAQ
- 137 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 73 About Community
- 62 Security Highlight