VPN BETWEEN ZYXEL ATP200 AND FRITZBOX! 7590

Options
13»

All Replies

  • zyman2008
    zyman2008 Posts: 201  Master Member
    First Anniversary 10 Comments Friend Collector First Answer
    Options
    @Kepir
    Disable the 1st policy route.

  • Kepir
    Kepir Posts: 16  Freshman Member
    First Anniversary 10 Comments Friend Collector
    Options
    zyman2008 said:
    @Kepir
    Disable the 1st policy route.

    Thank you,

    but still the same problem.
  • Zyxel_Stanley
    Zyxel_Stanley Posts: 1,368  Zyxel Employee
    First Anniversary 10 Comments Friend Collector First Answer
    Options
    Hi @Kepir
    What's your client IP address and destination IP address in your test?
    In current VPN setting, USG could handle route traffic from "172.16.0.0/22"  to "192.168.178.0/24".
    If your IP address doesn't include in these IP segments, then traffic route will not work.
  • Kepir
    Kepir Posts: 16  Freshman Member
    First Anniversary 10 Comments Friend Collector
    Options
    Hello Stanley,
    Source ip is 192.168.178.188 and 172.16.0.5 for Destination.
  • Kepir
    Kepir Posts: 16  Freshman Member
    First Anniversary 10 Comments Friend Collector
    Options
    And,

    as you can see in the images the ping from usg ( 172.16.0.1 )  to fritzbox ( 192.168.178.1 ) also did not work, 
  • Zyxel_Stanley
    Zyxel_Stanley Posts: 1,368  Zyxel Employee
    First Anniversary 10 Comments Friend Collector First Answer
    Options
    Hi @Kepir
    For troubleshoot this issue, it requires captures the packets on both of PCs on each sites.
    Is any capture tools on FRITZBOX! ?
    You can send ICMP from USG site PC (172.16.0.X) to 192.168.178.X and make sure if "Outbound" traffic has increased in Monitor > IPSec View.
    According to troubleshoot     FRITZBOX! site, you may contact to FRITZBOX support's help continually.

Categories

Security Highlight


Read more

Security Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）