No DNS resolution on Windows 2016 via USG60

Options
LouroeIT
LouroeIT Posts: 3 image  Freshman Member
First Comment
edited April 2021 in Security
I setup the USG60 with a Static IP on the WAN1 with the Public DNS server addresses, but for some reason, Windows 2016 DNS stops working, Windows Server is also the DHCP, LAN1 has a private IP and the DHCP is disabled, what am I doing wrong?

All Replies

  • Zyxel_Stanley
    Zyxel_Stanley Posts: 1,435 image  Zyxel Employee
    100 Answers 1000 Comments Friend Collector Eighth Anniversary
    edited September 2018

    Hi @LouroeIT

    Can you provide your topology of your environment?

    Does your Windows server is behind USG ? Or located at other else?


  • LouroeIT
    LouroeIT Posts: 3 image  Freshman Member
    First Comment
    Hello, my Windows server is behind the USG, I have a simple LAN and I need to use the USG as my router as well.
  • LouroeIT
    LouroeIT Posts: 3 image  Freshman Member
    First Comment
    I fixed it, I set the LAN1 (P3) as a DHCP server and setup the DNS servers and every workstation is now on the internet.  It was a DNS issue, I just turned off the DHCP on my server and everything is back online.
  • Zyxel_Stanley
    Zyxel_Stanley Posts: 1,435 image  Zyxel Employee
    100 Answers 1000 Comments Friend Collector Eighth Anniversary

    Hi @LouroeIT

    If you setup static IP address on your server, then DNS IP address is required.

    As your scenario, DNS IP address should set as USG interface IP address.


Categories

Security Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）